Advertisement
Quick Links
Advertisement
Summary of Contents for G-Technology G Rack 12
- Page 1 BARE METAL RECOVERY ESSENTIAL GUIDE High-Performance NAS g-technology.com...
-
Page 2: Bare Metal Recovery
Bare Metal Recovery... - Page 3 Introduction Safety Notice Please read and observe the following precautions to assure personal safety. Improper use can result in hazardous situations. 1. The G-RACK 12 operates normally in the temperature range of 0ºC–50ºC and relative humidity of 8%–90%. Please make sure the environment is well ventilated. 2.
- Page 4 G-RACK 12 with all the electronic components in place and properly working. This process fails if you do not have the drives in the unit. • A G-Technology provided USB key with the restoration software pre-loaded. • USB Keyboard •...
- Page 5 Bare Metal Recovery Powering Up. When you first power up the unit look at the monitor for a sign that the USB key is booting the recovery software. If you get no change or you get an error message that you can’t boot there is an excellent change the BIOS is not set to boot of the USB key.
- Page 6 Bare Metal Recovery 3. Immediately, the install process starts. 4. As it progresses you will see the update bar change. 5. If you see this screen you have successfully installed the software. The server is ready to reboot. Remove the USB key from the back of the unit and press Enter.
- Page 7 Bare Metal Recovery 6. You can expect to see messages like the ones below scrolling past the screen as the OS is fully loaded. 7. When you get to this screen your restoration is complete. It will be save to remove the USB keyboard and the monitor from the connectors.