Hama Freedom Run Operating Instructions Manual page 8

Search using your device for the earphones (only required on the first connection)
2
Open the Bluetooth settings on your device and wait until the list of found Bluetooth
®
shows Hama Freedom Run .
Select Hama Freedom Run and wait until the earphones are shown as connected in your device's
Bluetooth settings . You will hear a brief signal tone .
®
Bluetooth
Hama Freedom Run
Note - Bluetooth ® password
Some devices require a password in order to connect to another Bluetooth
• If your device requests a password to connect to the product, enter 0000 .
3
Multi-point technology
These headphones can connect to two Bluetooth
ON
-enabled devices simultaneously (multi-point) .
®
• First connect the first device to the headphones .
• Then deactivate the Bluetooth® function on this device .
• Then connect the second device to the headphones .
• Activate the Bluetooth® function on the first device again . The
headphones then connect to this device too .
devices
®
Password
0000
device .
®
8