Related Manuals for Challenger SLPW1W
Summary of Contents for Challenger SLPW1W
- Page 1 SLPW1W, SLPW1B 180° 12m Slimline Security Lighting PIR User Manual Challenger_SLPW1B_ SLPW1W_Instructions_Rev01...
- Page 2 1. Introduction Please read the instruction manual before installing and retain for the user/maintenance engineer for future reference. • This detector uses passive infra-red sensors to switch various types of lighitng loads upon detection of movement • Suitable for indoor or outdoor use and can be used in residential or commercial environments •...
-
Page 3: Important Note
IMPORTANT NOTE: Installation must be performed by a skilled electrician who is familiar with the appropriate standards and technical requirements of the appliance and its proper installation. The person carrying out the installation is to check and verify that the total load on the circuit, including the rating of the cable, fuse and/or circuit breaker is not exceeded. - Page 4 3. Testing Turn the LUX adjuster fully clockwise (Sun); turn the TIME adjuster fully anti-clockwise to the minimum (10s). • Switch on mains AC supply and after a 30sec warm-up period the sensor will now be in test mode • Walk test the sensor, when the sensor receives a valid trigger signal (such as movement of a human body or heat) within its detection area the lamp will turn...
- Page 5 Due to our policy of continuous improvement w e reserve the right to change specification w ithout prior notice. Errors and omissions excepted. These instructions have been carefully checked prior to publication. How ever, no responsibility can be accepted by Challenger for any misinterpretation of these instructions CHALLENGER SECURITY PRODUCTS...