Do you have a question about the TAD-240 and is the answer not in the manual?
Questions and answers
Summary of Contents for Premier Tech Aqua TAD-240
Page 1
LID-240S lids (consult section 4. for more information on lids). Material included with the TAD-240 access adaptor: 1 TAD-240SC access adaptor without lid, 1 LID-240S lid, 4 lag screws with washers and 1 watertight seal.
Page 2
1.2 Installation Procedure 1.2 Installation Procedure To install the TAD-240 adapter, completely clear the access wells until you reach the septic tank's concrete surface. Remove the old riser(s). Clean the surface of the concrete thoroughly where the adapter is to be installed. Make sure the surface of the adapter is clean and dry and then install 19 mm X 19 mm (¾"...
Page 3
2.2 Installation procedure The PSR-060 and PSR-140 risers are easy to install. The risers can be installed on several PTA products, such as the TAD-240 access adapter, the PSA-240 pumping stations, the septic tanks, the holding tanks, the TLF-240 reservoirs, etc.
Page 4
• Self-cleaning DiUV disinfection unit; • PSR-060 and PSR-140 risers; • TAD-240 septic tank adapter; • PFS-300C to 1000C pressure flow dividers; • Other products such as the TLX-240, TSD-240, TLF-240/P, TLV-240, PSX-240, TLP-FDi, etc. There are two models of lid:...
Page 5
Exclusion Premier Tech Aqua will not be liable for any damages, problems or expenses arising from inappropriate installation or use of the product. This warranty will be null and void if product failure is caused by or arises from modifications, faulty installation, improper usage or alterations.
This manual is also suitable for:
Tad-240scPsr-060Psr-140Tlf-240Tlf-240pLid-240s...
Show all
Need help?
Do you have a question about the TAD-240 and is the answer not in the manual?
Questions and answers