Download Print this page

Peradon TIMESAFE Assembly, Installation And Operation Instructions

Adm billiard timing meter

Download this manual

Installation and Operation

Instructions for

Designed and Manufactured in Great Britain exclusively for Peradon

TIMESAFE

ADM BILLIARD TIMING METER

MAKERS OF FINE CUES, TIPS AND ACCESSORIES SINCE 1885

128 Richmond Row, Liverpool L3 3BL.

Telephone: 0151 298 1470 Fax: 0151 298 2988

Page 1 Installation and Operation Instructions for Designed and Manufactured in Great Britain exclusively for Peradon TIMESAFE ADM BILLIARD TIMING METER MAKERS OF FINE CUES, TIPS AND ACCESSORIES SINCE 1885 128 Richmond Row, Liverpool L3 3BL. Telephone: 0151 298 1470 Fax: 0151 298 2988...
Page 2 1. INTRODUCTION The Timesafe meter has been designed using modern technology to give an extremely reliable unit. The modular construction allows for easy servicing when required. The meter is simple to install and requires no maintenance other than regular emptying of the cash box. The operating characteristics as defined by BS-EN60730 are type 1B. The meters comply to the latest EMC and Low Voltage directives, meeting EN60730-1:92, EN50082-1:92, EN55014:93, and EN60555-2:87.
Page 3 Switch 3 gives four; so if Switches 1, 2 , 3 and 4 are ON, 15 minutes (or seconds) will have been Although the ADM Timesafe billiard timing meters are strong and reliable, they are obviously targets for programmed. See Figure 7.
Page 4 4. OPERATION 5. REPAIRS AND FAULT FINDING IMPORTANT In case of failure the front panel may be removed and completely replaced or individual parts replaced. . In all cases it is not necessary to remove the control unit from the wall. NEVER OPERATE UNIT WITH FRONT PANEL UNSECURED OR WITH CASE UN- EARTHED.