Advertisement
1. This section describes procedures for checking the operation of
the major printed circuit boards and replacing the main
components.
2. For reassembly after operation checks or replacement, reverse the
respective procedures. / Special reassembly procedures are
described only when required.
3. Select items from the following index when checks or replacement
are required.
Content
- Disassembly Procedure for each major P.C.B.
.......................................................................................................... P.g.
7~10
- Main Component Replacement Procedures
1. Replacement of the Power IC and Regulator
Transistor........................................................................................
P.g. 11~12
2. Installation of the bottom cover after
replacement...........................................................
............................................ P.g. 12
6.1. Disassembly Procedure for each major P.C.B.
Step 1 & Step 2 Unscrew and remove top cabinet as shown.
10
Advertisement
