Setting The Time Of Day; Setting The Water Hardness Level - Miele G 7460 Operating Instructions Manual

Setting the time of day

The time of day is set automatically if
a connection is established with the
WiFi network.
The display will then change to the
screen for setting the time of day.
The current time of day must be set be-
fore you can use the timer option.
 Use the  sensor controls to enter
the hour and confirm your entry by
touching OK.
 Then set the minutes and confirm
with OK.
Holding down the relevant  or
 sensor control will increase or de-
crease the time automatically.
Before using for the first time

Setting the water hardness level

The display will change to the screen
for setting the water hardness.
- You should programme the dish-
washer to the correct water hardness
for your area.
- Your local water authority will be able
to advise you of the water hardness
level in your area.
- Where the water hardness fluctuates
e.g. between 1.8 and 2.7 mmol/l (10 -
15 °dH - German scale) always pro-
gramme the dishwasher to the higher
value (2.7 mmol/l or 15 °dH in this ex-
ample).
In the event of a fault, it will help the
service technician if you know the hard-
ness of your local water supply.
Therefore, please enter the water hard-
ness:
____________°dH or mmol/l
The dishwasher is programmed at the
factory for a water hardness level of
2.5 mmol/l (14 °dH – German scale).
 Set the water hardness level in your
area and confirm using OK.
See the "Settings" chapter, "Water
hardness" section for more informa-
tion.
25