Advertisement
Ground Strap for Electrostatic Sprayers. This aids to prevent electrostatic shock from using electrostatic
sprayers
INSTALLATION
• Disconnect unit from power and ensure there is no remaining liquid contained in the unit.
• Disconnect current grounding strap from the base of the unit.
• If no grounding strap is connected to the unit, locate the cable attachment found on the bottom of the unit then
connect the grounding strap to it.
• Fill the unit back up with desired liquid and connect to power.
• Carefully follow main unit's instructions to properly use.
USE AND CARE
Unauthorized modification may impair the function and/or safety of this device and could affect the life of the equipment.
Always check for damaged or worn out parts before using the device. Store it in a secure place out of the reach of
children when not in use. Inspect for good working condition prior to storage and before re-use.
REPLACEMENT PARTS
The IND-MD-DF-ESF-XX-SP1349 is designed to provide years of reliable performance. Should the need for replacement
parts arise, please contact Larson Electronics.
THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS.
SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT
SALES@LARSONELECTRONICS.COM
PLEASE VISIT LARSONELECTRONICS.COM FOR WARRANTY AND RETURN INFORMATION.
Larson Electronics, LLC
OR BY PHONE AT 1-800-369-6671 FOR FURTHER ASSISTANCE.
Phone: (800) 369-6671
Fax: (903) 498-3364
IND-MD-DF-ESF-XX-SP1349
www.larsonelectronics.com
2 of 2
Advertisement
