Samsung SRP-250 Series Operator's Manual page 36

All manuals and user guides at all-guides.com
ESC t n
[Name] Select character code table.
[Format] ASCII
Hex
Decimal
0 ≤ n ≤ 5, 254 ≤ n ≤ 255
[Range]
[Description] Selects a page n from the character code table.
n
0
2
3
4
5
19
ESC u n
[Name] Peripheral status.
[Format] ASCII
Hex
Decimal
[Range] n = 0
[Description] Transmits the peripheral status (drawer).
After receiving this command, the printer transmits only
1 byte without confirming the condition of the DSR signal.
Transmit data : 01H = drawer open.
• This command is available only with a serial interface, and is ignored
with a parallel interface.
ESC { n
[Name] Turns on/off upside-down printing mode.
[Format] ASCII
Hex
Decimal
0 ≤ n ≤ 255
[Range]
[Description] Turns upside-down printing mode on or off.
• When the LSB of n is 0, upside-down printing mode is turned off.
• When the LSB of n is 1, upside-down printing mode is turned on.
ESC t n
1B 74 n
27 116 n
Page
0 (PC437 {USA, standard Europe})
2 (PC850 {Multilingual})
3 (PC860 {Portuguese})
4 (PC863 {Canadian-French})
5 (PC865 {Nordic})
19(PC858{Euro})
ESC u n
1B 75 n
27 117 n
00H = drawer closed.
ESC { n
1B 7B n
27 123 n
35