Related Manuals for INDIWORK BZL-ECS06-NTG4
Summary of Contents for INDIWORK BZL-ECS06-NTG4
- Page 1 Instruction Manual High Quality and Advanced Technology MODEL : BZL-ECS06-NTG4 (Square 10-pin LVDS Type) BENZ E,C,S CLASS LVDS TYPE PIP VIEW (2006~ ) www. .co.kr...
- Page 2 Components BZL-ECS06-NTG4 Power&CAN Cable LVDS Cable Multi Power Output Rear IN Cable...
- Page 3 Connector Pin Specification NAVI HDMI LVDS VIDEO CAN1: OEM Button CAN2: GEAR C: REAR CAMERA B: CAN2,12V OUT D: NAVI HDMI IN A: POWER, CAN1 1. NC 11. Video Ground 1. VCC (Red) 2. GND (Black) 2. NC 12. Camera Video Input 3.
- Page 4 DIP Switch Settings OFF: BENZ S-CLASS (2006 ~ 2009) Europe BENZ S-CLASS (2006 ~ 2009) Japan BENZ E-CLASS (2009 ~ 2011) BENZ S-CLASS (2008 ~ 2011)
- Page 5 CAN Connection (S-CLASS) CAN1 Connection: CAN2 Connection: Connector behind monitor. Connector behind deck. CAN1 H: Black/White CAN2 H: Yellow/White CAN1 L: Black CAN2 L: Yellow...
- Page 6 LVDS Connection (C-CLASS) LVDS IN LVDS OUT Taping after connecting the Y connector to LVDS of the original monitor.
- Page 7 LVDS Connection (E-CLASS) LVDS IN LVDS OUT Taping after connecting the Y connector to LVDS of the original monitor.
- Page 8 LVDS Connection (S-CLASS) LVDS IN LVDS OUT Taping after connecting the Y connector to LVDS of the original monitor.
- Page 9 Activation by original buttons (E,C-CLASS) * When the ‘PIP Display’ is ‘Yes’. (Default) (OSD Set -> PIP Display Menu) <CLR> Button : Short press : PIP ON/OFF Long press after PIP displayed. : Videos 1:1 change. <BACK> Button : Long press : Switch screen to Android. Short press : Switch screen to OEM Original Mode.
- Page 10 Activation by original buttons (S-CLASS) * When the ‘PIP Display’ is ‘Yes’. (Default) (OSD Set -> PIP Display Menu) <DISC/RADIO> Button : Long press : PIP ON/OFF Short press : When PIP is off, switch screen to full OEM Mode. <BACK>...
- Page 11 OSD Setting (Easy Menu) Easy Menu Selection Select the Navigation (Android Settop) Default: NO * If use the PGS with an external camera, an additional PGS adapter is required. -11-...
- Page 12 OSD Setting (Basic Menu) Not used Mirroring adapter required Basic Menu Selection Set the input source to be used, whether to use it, and the rear camera. 12V output voltage setting of interface C connector #3. -All Rear Event: 12V Output when reverse gear - Power for external rear camera. -All OEM Source: 0V in OEM screen/12V in external screen - Touch control power available -Original,Navigation,Smarphone, AV1,AV2: 12V output only in the selected source.
- Page 13 OSD Setting (Basic Menu) Set Navigation - Not normally used. PIP -On/Off, and position setting. OEM/Navigation color adjustment Video color adjustment -13-...
- Page 14 .co.kr Copyright ⓒ INDIWORK. All Rights Reserved.