Right - Lenovo IdeaPad Flex 5i User Manual

Right

1. Power button with power light
2. SD card slot
3. USB (3.2 Gen 1) Type-A connector
4. USB (3.2 Gen 1) Type-A connector
(always-on)
Press the button to turn on the computer or put the computer into
sleep mode. The light on the power button shows the system status
of your computer.
• On: The computer is turned on.
• Blinking fast: The computer is turned on; battery charge
percentage 1% - 20%.
• Blinking slowly: The computer is in sleep mode.
• Off: The computer is turned off or in hibernation mode.
Insert an SD card or a MultiMediaCard (MMC) into the slot for data
transfer or storage.
Connect to a USB-compatible device, such as a USB keyboard, a
USB mouse, a USB storage device, or a USB printer.
The always-on connector can charge external devices when the
computer is turned off, in sleep or hibernation mode. The always-on
function can be turned on or off in the UEFI/BIOS setup utility.
Note: If Lenovo Vantage is pre-installed on your computer, you can
also set always-on function within that software.
.
Chapter 1 Meet your computer
5