Technical Specification - Philips PET1002 Service Manual

1.0 TECHNICAL SPECIFICATION

General
Dimensions (WxLxH): 26 x 18 x 3.0 cm
10.2 x 7 x 1.2 inches
Weight: 1.13 kg / 2.48 lb
Power supply: DC 9V 2.2A
Power consumption:
30W
Operating temp. range: 0 - 50˚C (32 ~ 122˚F)
Laser wavelength: 650nm
Video system: NTSC / PAL / AUTO
Frequency response: 20Hz ~ 20KHz ± 1dB
Signal/noise ratio:
Audio distortion + noise:
-80(1KHz)
Channel separation:
Dynamic range:
Output
Audio out (analog audio): Output level: 2V ± 10%
Load impedance:
10K
Video out Output level: 1Vp - p ± 20%
Load impedance:
75
Current consumption
DC-IN SUPPLY (9.0V)
Battery Charging Current
BATT. SUPPLY (7.2V)
Power Off
Playback with TFT on
Playback without TFT on
Battery playtime
Headphone out (headphone output load 2x16ohm)
Maximum output power:
Frequency response:
SNR (A-wght):
THD (1kHz):
Left-Right Channel
Separation:
Left-Right Channel
Balance:
Supported disc type
DVD video discs:
Video CD:
All manuals and user guides at all-guides.com
85dB
85dB
80dB
1.2A typ.
0A
<1.2A typ.
<600mA
>2.5hrs
>10mW
20Hz - 20kHz
80dB typ.
<1%
32dB typ.
1dB
Audio CD:
DivX video discs:
In addition, this unit can play DVD+R & DVD+RW and CD-R &
CD-RW that contains audio titles or MP3 or JPEG files.
You cannot play disc other than the above listed.
(CVD, CD-ROM, CD-Extra, CD-G and CD-I discs cannot be
played on this DVD player)
Software upgrades
For the best performance of your DVD Portable. Check
www.philips.com/support for latest software
upgrades available.
To check the software version of your DVD Portable.
1. Press the SETUP key to enter the setup menu.
2. Press RETURN and then press 1. 2 and 3 on the
remote control.
3. The display will show the software version as the
date of which the software was built on the bottom
of the screen. E.g. 050303
Procedure on how to upgrade the software of the DVD
Portable
1. Download the latest software from the Philips
support site.
2. Unzipped the files and then burn it onto a CD ROM
then playback the CD ROM on the DVD Portable.
Pixel specification
<= 3 (max. 0 bright dots and 3 dark dots)