Page 3
Understanding Mounting and Installer’ s Choice® Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angled mounting. The steps in this manual include instructions for all three Installer’s Choice mounting methods.
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •...
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Flat Washer 42637-01 • 02/10/09 • Hunter Fan Company Ceiling Plate Step 2-2 Steps 2-3 – 2-5...
Go to 4 • Wiring the Fan . WARNING: Fan may fall if not assembled as directed in these installation instructions. Ceiling Plate Tabs Canopy Slots 42637-01 • 02/10/09 • Hunter Fan Company Steps 3-1 – 3-2 Setscrew Steps 3-3 – 3-4 Step 3-5 Downrod Canopy...
4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 42637-01 • 02/10/09 • Hunter Fan Company...
Step 5-1 Groove Step 5-2 Step 5-3 42637-01 • 02/10/09 • Hunter Fan Company 5 • Installing the Canopy 5-1. Rotate the hanger ball so the tab in the canopy is secure in the groove in the hanger ball. WARNING: Failure to complete this step could cause fan to fall.
Blade Assembly Use with grommet Use without grommet Blade Mounting Screw 42637-01 • 02/10/09 • Hunter Fan Company 6 • Assembling the Blades Step 6-1 (Detail) Grommet Screws Step 6-4 Steps 6-1 – 6-2...
Switch Housing Step 7-4 42637-01 • 02/10/09 • Hunter Fan Company WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the upper switch housing, partially install two #6-32 x 3/8” housing assembly screws into the switch housing mounting plate.
190 Watts. Exceeding that limit or the marked limit on this product may result in fire hazard or improper operation. 42637-01 • 02/10/09 • Hunter Fan Company Thumbscrews Steps 7-7 – 7-8 Shade...
Turn the fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. 42637-01 • 02/10/09 • Hunter Fan Company In warm weather, use downward air flow pattern...
Problem: Lights dim when turned on or do not turn on 1. Check to make sure the wattage and type of light bulbs installed match the specifications on the light socket. 42637-01 • 02/10/09 • Hunter Fan Company 9 • Troubleshooting If you need parts or service assistance, please call 888-830-1326 or visit us at our Web site at http://www.hunterfan.com.