Advertisement
Optional Steering Wheel Control Programming (cont.)
Step A.
Turn the vehicle ignition to
the ON position.
Step C.
Release the
programming
button. The
LED will turn
back on.
Step E.
x4
Release the button.
Step F.
If you need to program more buttons,
repeat steps D & E for each additional
SWC Connection
audio function on the steering wheel.
Step G.
After all buttons are
programmed
Testing & Verification
1. Turn the ignition on. The LED on the interface will turn on & the +12v accessory wire will turn on.
2. Turn on the radio & check balance & fade. Note: Factory amplified Systems will not fade as neither the aftermarket radio or
the RP interface have the ability to control the amplifier's fader.
3. Verify that the factory subwoofer (if present) is playing
4. Verify that all SWC are functioning properly.
4. Turn off vehicle & remove key. RAP will be active & keep the radio on for 10 minutes or until the drivers door is opened.
5. The LED & radio will turn off when RAP turns off or the drivers door is opened.
Pacific Accessory Corporation
Pacific Accessory Corporation
Step B.
Press and
IGN
hold the
ACC
STRT
programming
OFF
button.
Step D.
Within 7 seconds,
press and release the
button that is to be
learned on the steering
wheel.
VOL
Program
remaining buttons
x4
Once programming is
See above chart for
different radio type
completed,
connections
The LED will flash four
times indicating the end of
programming.
x4
| Santa Ana, California 92705 | Ph. 866-931-8021 | support@pac-audio.com
®
©2011 Pacific Accessory Corporation
www.pac-audio.com
Radio Replacement & Steering Wheel Control Interface
x4
x4
VOL
x4
wait 7 seconds
.
SWC Connection
SWC Connection
RP4-FD11
for Ford/Lincoln/Mercury Vehicles
LED will turn off.
The LED will
turn off during
this process.
The LED will turn on
back on.
SWC Connection
SWC Connection
See above chart for
different radio type
connections
SWC Connection
See above chart for
different radio type
connections
Rev. 112811
See above chart for
different radio type
connections
See above chart for
different radio type
connections
Page 4
Advertisement
