Subscribe to Our Youtube Channel
Summary of Contents for Avipas AV-POE4
- Page 1 Model: AV-POE4 4-port PoE Switch User Guide V1.0 Please read this user guide thoroughly before using. www.avipas.com...
- Page 2 The "safety warnings" listed in the guide only reflect of some the requirements. AViPAS will not bear any responsibilities for the loss caused by violation of general safety operation requirements.
- Page 3 Product Specifications ▪ DC Input: DC 52V 1.25A ▪ Port Max: 30W, Total: 65W ▪ PoE Output: IEEE 802.3af/at ▪ 4x PoE+ (802.3at/af) 10/100/1000 Mbps RJ45 ports (unmanaged) ▪ 1x Gigabit Non-PoE Port for high-speed connections Product installation Installation instructions ▪...
- Page 4 Connect the devices PoE Switch connection diagram Caution: ▪ Before installing or removing the PoE switch, power must be disconnected. Operating the PoE switch with its power on is prohibited to prevent injury or damage to the device. ▪ Make sure that the protective ground wire of each device is securely grounded. All power cables must NOT have any open parts exposed in the air.
- Page 5 Indicator lights and button/switch function table Symbol Function State Description Color Work Normal Green indicator Switch has no power supply or initialization failure Normal Blink PD device failure or power overload Green No connected PD or switch has no power Link is established and ready to use Link Network...
- Page 6 To receive warranty service, please contact AVIPAS Inc. first. We will decide whether a repair or replacement is needed and will advise you of the cost of such repair or replacement.
Need help?
Do you have a question about the AV-POE4 and is the answer not in the manual?
Questions and answers