Advertisement
Attach the 12mm L-brackets onto the Base
Platform, then insert the washer into the
locking knob.
Secure the L-Brackets using locking knobs as
shown in the images.
Note: There are many holes on the Base
platform. You can attach the L-Brackets at any
spot according to the Laptop size.
Slightly loosen the bolts of the C-stand
adapter.
Mount the Base platform onto a Tripod or a
Light Stand.
Note: The base platform is compatible with
laptops with a height between .375"-1", a length
between 10"-17" and a width between 7"-11".
Loosen the bolts on the curve bracket to
remove the bottom plate.
3
Advertisement
