Advertisement
Quick Links
3m x 3m Printed Gazebo
Assembly Instructions
2 wood grain finishes.
FOR ATTENTION
CAUTION
Scissor sections
of frame are a
pinching hazard
• Take Shelter Down in
Heavy Wind
• Allow fabric to dry before
putting away
• Store in cover bag when
tent is not in use
4
6
1
Remove frame from bag. Extend the
frame partially by pulling outwards.
3
Pull canopy down tightly
over the corners of the frame
While standing on triangular
foot, extend the tent legs by
pulling up until snap button
"clicks into place.
www.xldisplays.co.uk
2
Apply canopy loosely over the frame.
5
Secure all interior velcro fastenings
7
01733 511030
Continue to extend frame
by pulling outwards until
corner snap button "clicks"
into position
Advertisement
Summary of Contents for XL displays 3m x 3m Printed Gazebo
- Page 1 3m x 3m Printed Gazebo www.xldisplays.co.uk Assembly Instructions 01733 511030 2 wood grain finishes. FOR ATTENTION CAUTION Scissor sections of frame are a pinching hazard Remove frame from bag. Extend the Apply canopy loosely over the frame. frame partially by pulling outwards.
- Page 2 3m x 3m Printed Gazebo www.xldisplays.co.uk Assembly Instructions 01733 511030 2 wood grain finishes. SECURING TENT option Secure using Guy Ropes option Secure using Pegs through and Pegs through Canopy Loops the Holes in Tent Feet Note: Hammer/Mallet required for pegs...
Need help?
Do you have a question about the 3m x 3m Printed Gazebo and is the answer not in the manual?
Questions and answers