CGEO-TEM2 Resistance Temperature Sensor 1. Brief Introduction CGEO-TEM2 Thermometer is composed of a stainless steel crust, thermo-resistance, and the CGEO-4-SCT special cable with the outstanding water-proof capability and signal stability. It is widely used in temperature controlling and monitoring of high technology, industrial production and science research and other areas.
BSIL-T2-1.1 Instruction Manual Cable Welding Lengthening A standard CGEO-TEM2 model temperature gauge equips with 1m cable in ex-factory, cable model is CGEO-4-SCT. For cable lengthening adopted is CGEO-4-SCT dedicated cable, and BSIL-4-SC cable as well as. Proceed lengthening basing on the field circumstance before installation.
Figure 5 Cable welding splice diagram 4. Using Surroundings & Installation Notice Though the CGEO-TEM2 Temperature Transducer can be used in all atrocious environments, it is still necessary to avoid using in the area which is over the standard range (with the exception of the customized), and avoid long-time using in strong acid and alkaline areas.
This resistance will not be taken into consideration under low-temperature environment. The resistance of matched cable core is about 50Ω/1000m, and doubled when in two-direction. Appendix A: Resistance versus Temperature Table CGEO INTERNATIONAL LIMITED Installation Manual...
Page 9
BSIL-T2-1.1 Instruction Manual CGEO-TEM2 Semiconductor Thermometer Control Table of Resistance - Temperature CGEO INTERNATIONAL LIMITED Installation Manual...