Advertisement
PL71-250EN
10/07/2014
The original language of this manual is English.
Product Safety Information:
Intended Use:
This pneumatic motor is to be used exclusively as a
power source to be integrated into an application.
For additional product safety information refer to Apex
Tool Group, LLC or Apex Tool Group GmbH & Co. OHG
document CE-2005, General Safety Instructions for Air
Motors.
WARNING
The motor must not be modified in any manner unless
approved in writing by Apex Tool Group, LLC or Apex
Tool Group GmbH & Co. OHG. All safety devices must
be properly installed and maintained in good working
order.
Declaration of Incorporation:
We affirm that this machine complies with the basic
requirements of the following directives (2006/42/EC)
and is intended for installation / assembly in a / with
other machine(s). Commissioning of the incomplete
machine is prohibited until such time that the incomplete
machine has been incorporated in a machine that
complies with the EC Machinery Directive 2006/42/EC
and for which there is an EC Declaration of Conformity
in accordance with Appendix II A. We furthermore
declare that the special technical documentation for the
incomplete machine is in accordance with Appendix VII
Part B. We undertake to have it passed on to the market
surveillance body upon request by our representative
for the compilation of technical documentation. The
following Sections of Appendix I of Directive 2006/42/EC
have been fulfilled: 1.1.2, 1.1.3, 1.1.5, 1.3.2, 1.3.4, 1.5.
Applied harmonized standards are ISO 12100-1: 2004-
04, ISO 12100-2:2004-04.
The name, job function and address of the person
authorized to compile the technical file.
Mr. Vishnu Irigireddy
Director of Global R&D- Mechanical Engineering
Apex Tool Group
670 Industrial Drive
Lexington, SC 29072
_______________________
Signature: Vishnu Irigireddy
Date: October 06, 2014
Cleco
®
Product Information
Air Line Lubrication:
Use Apex Tool Group, LLC or Apex Tool Group GmbH
& Co. OHG's lightweight air tool oil 500021 (available
in quantities shown in the following chart) or an SAE-5
lightweight spindle oil.
Part No.
540397
533485
Recommended Grease:
Part No.
540395
513156
Air Supply Line:
Parameter
Air Hose
Working
pressure range
Compressed air
Service and Repair:
Tool service and repair should be performed by an
authorized Apex Tool Group, LLC or Apex Tool Group
GmbH & Co. OHG Service Center. Refer to the last
page of this manual for locations.
Disposal:
Copyright Protection:
Apex Tool Group, LLC or Apex Tool Group GmbH &
Co. OHG reserves the right to modify, supplement or
improve this document or the product without prior
notice. This document may not be reproduced in any
way, shape or form, in full or parts thereof, or copied to
another natural or machine readable language or to a
data carrier, whether electronic, mechanical, optical or
otherwise without the express permission of Apex Tool
Group, LLC or Apex Tool Group GmbH & Co. OHG
Page 4
Packaged
1 Quart (0.94 liter)
Airlube 10W/NR-420LB DR
1 US Gallon (3.78 liter)
Airlube 10W/NR-420LB DR
Packaged
2 oz. (0.06 kg)
16 oz. (0.45 kg)
Description
Minimum inside diameter:
1/4" (6.35mm)
Maximum length: 8.0' (2.5 m)
Performance rated at: 90 psi (620 kPa)
Air quality according to ISO 8573-1, quality
class 2.4.3
The compressed air must be clean and dry.
Observe local disposal guidelines for all
components of this tool and its packaging.
Designation
Designation
Teflon Grease
Teflon Grease
Advertisement
