Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for MicroVision MV-2400li3
- Page 1 QUICK START GUIDE MV-2400li3 Consumer LiDAR Starter Kit...
-
Page 2: Cautions And Warnings
Quick Start Guide or User Guide may result in hazardous laser radiation exposure. * The MicroVision Consumer LiDAR Explorer Edition is a Class 1 device that conforms to the IEC 60825-1:2014 Edition 3. Additional information regarding the laser classification... -
Page 3: Service And Maintenance
THERE ARE NO OPERATOR SERVICEABLE PARTS INSIDE THE STARTER KIT For preventative maintenance or repair of performance-related issues, the system must be returned to MicroVision. See the Warranty accompanying in this Quick Start Guide for contact information to initiate a return. - Page 4 MV-2400li3 CONSUMER LIDAR STARTER KIT The MicroVision Consumer LiDAR Starter Kit facilitates the evaluation of the Consumer LiDAR Explorer Edition hardware and for host device application software development. It is delivered ready to assemble into a working LiDAR system. It is not intended to represent a consumer-ready end product.
- Page 5 IN THE BOX • Base plate • Data conversion board • Three M2 x 8 mm long Phillips flat head screws • Two M2 x 16 mm long Phillips pan head screws • Fan assembly • Two M2.5 x 8 mm long Phillips pan head screws •...
- Page 6 DIRECTIONS 1. Attach the Explorer Edition (sold separately) to the base plate • Place the Explorer Edition on top of the base plate and run the three M2 x 8 mm long Phillips flat head screws in through the bottom of the base plate using the supplied #0 Phillips screwdriver ;...
- Page 8 POWERING ON 1. Plug the 5V DC power supply into an 110V-220V AC outlet and connect the barrel plug from the 5V DC power supply to the power jack on the Starter Kit data conversion board. 2. Plug the USB cable Type-A end into a PC and the USB-C end into the jack on the data conversion board.
-
Page 9: Software And Applications
Software, Software Development Kit, User Guide and Example Applications. Consult the bar code label on the box for your specific model. SERVICE AND SUPPORT For questions and support please contact MicroVision Customer Service by e-mail at customerservice@microvision.com. Engineering and development support are not included with the purchase of the MV-2400li3. - Page 10 (such as FCC, UL, CE, etc.) with the exception of IEC 60825-1 Laser Safety. MicroVision assumes no liability for application assistance, customer’s product design, or software performance.
- Page 11 Repair or replacement of any parts or equipment does not extend the period of warranty. If a component MicroVision bought from a third party fails and the component is still covered by a warranty from a third party, MicroVision will take reasonable action to pass that warranty on to customer.
- Page 12 © 2019 MicroVision, Inc. All rights reserved. DB0140004...
Need help?
Do you have a question about the MV-2400li3 and is the answer not in the manual?
Questions and answers