Battery Charging And Activation - Alfa Romeo ARO User Manual

Prior to using the item for the first time, charge to 100%. Ensure the item, charger, and charging
port are dry.
Instructions
Open the kickstand
Switch off the scooter
MODEL REFERENCE PICTURE
AR0
CAUTION
To recharge the item, use the battery charger supplied ONLY
MODEL BATTERY CHARGER MODEL
AR0
XVE083-4200200
Using another type of charger may damage the scooter or entail other potential risks.
Never leave the product unsupervised while it is charging. Do not ride the item while charging.
After each use, fully recharge the battery to extend its useful life. Do not recharge the item
immediately after use. Allow the scooter to cool for an hour before recharging.
The item should not be charging for extended periods. Overcharging reduces battery life and
poses additional potential hazards.
Allow the vehicle to discharge completely to prevent damage to the battery.
Damage caused by the battery being left uncharged for a long period is irreversible and is not
covered by the limited warranty. Once the damage has occurred, the battery cannot be recharged
(the battery must not be dismantled by unqualified personnel, as this could lead to electric shocks,

4. Battery charging and activation

OUTPUT VOLTAGE
42V – 2A
14
INSTRUCTIONS
- Remove the rubber cover
from the charging socket.
- Connect the battery charger
to the charging port and
then to the power socket.
- When the item is fully
charged, the light on the
charger changes from red
(charging) to green (charging
complete).
- After charging, close the
rubber cover on the charging
socket.
- Unplug the battery charger
from the power socket.
RECHARGE TIME
4-5 hrs