Advertisement
ANTIMICROBIAL HEALTHCARE GUEST CHAIR 300LB WEIGHT RATED
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part
quantities.
STEP 1: Secure Arm Frames (1L & 1R) to Back Cushion (3) using two Short Screws (5) for each Arm Frame
(1). DO NOT FULLY TIGHTEN SCREWS.
STEP 2: Attach Support Bars (4) between Arm Frames (1L& 1R) Secure Seat Cushion (2) to Support Bars (4)
using Four Long Screws with Washers (6) for each Support Bar (4). DO NOT FULLY TIGHTEN SCREWS.
STEP 3: Carefully turn chair to the upright position. APPLY FIRM PRESSURE TO ALIGN &
FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (8),Cover holes in Side Arm
Frames (1L & 1R) using Armrest Covers (7).
ATTENTION:MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
OFD-HC2100-BLK/GRY/BLUE
ASSEMBLY INSTRUCTIONS
PARTS:
1. Arm Frame (1L & 1R)...................2
2. Seat Cushion.............................. 1
3. Back Cushion..............................1
4. Support Bar.................................2
5. Short Screw................................4
6. Long Screw w/ Washer.................8
7. Armrest Cover.............................2
8. Allen Wrench(not shown)..............1
QTY
Advertisement
