Advertisement
2.
INTRODUCTION & SPECIFICATIONS
These air hose reels have a hard wearing composite casing with retracting air hose reel and
ratchet and free-running operation, enabling easy access to locations within the extended air hose
range. The reels come complete with an attachment bracket for wall, floor or ceiling mounting.
Hose Length . . . . . . . . . . . . . . . . . . .6mtr . . . . . . . . . . . . . . . .10mtr . . . . . . . . . . . . . . . .8mtr
Hose BoreØ . . . . . . . . . . . . . . . . . . .6mm . . . . . . . . . . . . . . . .6mm . . . . . . . . . . . . . . . .8mm
Maximum Pressure . . . . . . .10 bar/150psi . . . . . . . . . .10 bar/150psi . . . . . . . . .10 bar/150psi
Hose Type . . . . . . . . . . . . . .Polyurethane . . . . . . . . . .Polyurethane . . . . . . . . . .Polyurethane
Inlet - Outlet . . . . . . . . . . . . . . . .1/4”BSP . . . . . . . . . . . . . .1/4”BSP . . . . . . . . . . . . .1/4”BSP
3.
INSTALLATION
F
WARNING! Ensure that the hose is disconnected from the air supply during installation.
Do not position the hose in direct sunlight or in areas of extreme heat or cold.
p
3.1.
Ensure that the structure to which the air hose is to be fixed is of sound construction and
that the securing point will hold the working strain of the hose when in use.
3.2.
Position the supporting bracket on the surface and mark out the positions of the mounting holes,
having checked that the main body will turn sufficiently to allow the hose to be extended
without rubbing on either side of the air hose housing.
3.3.
Drill and plug the structure and screw mount the support bracket.
3.4.
Before use, check that all fixings are safe and secure, and that the hose extends and
retracts with ease.
3.5.
The hose reel is supplied set for ratchet operation. To disengage the ratchet, remove the
side panel covering the air inlet and unhook the spring. Refit the side panel.
Note: Keep the spring safe so that ratchet operation can be restored if required.
4.
MAINTENANCE & STORAGE
4.1.
Maintenance
F
WARNING! Before attempting maintenance or inspection vent any pressure remaining
in the hose.
p
4.1.1. To ensure reliable operation, clean the hose and casing regularly. DO NOT spray or wet
the unit, but clean with a cloth and warm water. DO NOT use solvents or detergents, as
these may cause permanent damage.
4.1.2. The hose reel is lubricated for life and does not require special maintenance. If the casing
needs to be opened, consult your nearest authorised service agent.
F
WARNING! DO NOT attempt to loosen, or remove, any casing screws yourself.
4.1.3. Replacement of the supply hose should be carried out by skilled personnel only, consult
p
your nearest authorised service agent.
4.2.
Storage
4.2.1. Ensure that the hose reel is clean and dry. Place it in a dark, dry, childproof location,
where the temperature will remain reasonably stable. DO NOT store in a nylon, or plastic,
bag as this will encourage condensation.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this equipment.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address,
including postcode.
01284 757500
SA810
Sole UK Distributor,
Sealey Group, Bury St. Edmunds, Suffolk.
01284 703534
SA812
sales@sealey.co.uk
e-mail
SA813
www.sealey.co.uk
9A>
Advertisement
