Advertisement
Available languages
Available languages
USER'S MANUAL
CHARGING THE BLUETOOTH
SPEAKER
1. Open the rubber seal cover (12).
2. Connect the Bluetooth speaker's mini USB socket (11)
with the computer's USB port through USB cable.
3. The charging LED (2) will turn ON in red light; the
rechargeable battery is in charging.
4. The charging LED (2) red light will turn OFF when the
rechargeable battery is fully charged.
5. Disconnect the USB cable, and close the rubber seal
cover (12) when it is done.
4
BLUETOOTH SPEAKER PAIRING /
RECONNECTING
1. Press the
button (1) , a message sound; "beep" will
announce from speaker and the mode LED (2) will
blinking in blue; the device is turned ON and goes into
searching / paring / reconnect mode for pair.
2. Now, turn ON the Bluetooth function on your mobile
phone.
3. Search for "NGS Roller Splash" and select it to pair (for
first time pairing or pairing a new mobile device).
4. The Bluetooth speaker will be reconnecting
automatically if your mobile phone has been
paired (Depend on the of mobile phone's type and
configuration, manual reconnection may require on
some devices).
5. If pairing is successful, a message sound; "beep" will
announce from speaker and the mode LED (2) light will
switch to slow blink in blue (once per 2 seconds ).
Advertisement
