Advertisement
Quick Links
User Guide
COPYSTICK2
Overview
The COPYSTICK2 is used for fast and accurate repeat drive
programming.
NOTE: Parameters can only be copied between drives of
the same product range and power rating (size).
Write
Transfer
Parameters &
PLC Program
to the DRIVE
Optistick Interface
Connects to RJ45
slot on the DRIVE
(see product
manual for futher
information)
Compatibility
This Option is suitable for use on the following product ranges:
EC Titanium
Model No.
ECS 100B
Compliance
Hereby, ABB declares that the radio equipment type Bluetooth
Wireless Access Point, model COPYSTICK2, is in compliance
with Directive 2014/53/EU.
The full test of the EU declaration of conformity is available by
contacting ABB.
Read
Transfer
Parameters &
PLC Program
from the DRIVE
Feedback / Activity Indicators
Lock/Unlock
Locks COPYSTICK2
parameter set so it cannot
be over-written (Transfer
Parameters from the DRIVE
function disabled)
Bluetooth Status
Advertisement
Related Manuals for ABB COPYSTICK2
Summary of Contents for ABB COPYSTICK2
- Page 1 The full test of the EU declaration of conformity is available by contacting ABB. Overview The COPYSTICK2 is used for fast and accurate repeat drive programming. NOTE: Parameters can only be copied between drives of the same product range and power rating (size).
- Page 2 Copying Data from a Drive Action Description Action Description Insert the COPYSTICK2 into the RJ45 port on the DRIVE When the COPYSTICK2 is unlocked both Wait for the COPYSTICK2 to complete its green arrows are displayed boot sequence The COPYSTICK2 is ready when the up-...
Need help?
Do you have a question about the COPYSTICK2 and is the answer not in the manual?
Questions and answers