Advertisement
Quick Links
Advertisement
Related Manuals for iBell HG20-82
Summary of Contents for iBell HG20-82
- Page 1 HEAT GUN HG20-82...
-
Page 3: Table Of Contents
TABLE OF CONTENTS 1. GENERAL POWER TOOL SAFETY WARNINGS __________ 2. HEAT GUN SAFETY WARNINGS ________________________ 3. PRODUCT SPECIFICATIONS ___________________________ 4. PRODUCT OVERVIEW _________________________________ 5. PRODUCT FUNCTIONS AND ASSEMBLY________________ 6. GENERAL OPERATION ________________________________ 7. TROUBLESHOOTING __________________________________ IBL HG20-82... -
Page 4: General Power Tool Safety Warnings
Keep it away from heat, oil, sharp edges or moving parts. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. IBL HG20-82... - Page 5 When servicing a power tool, use only identical replacement parts. Follow instructions in the maintenance section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of shock or injury. IBL HG20-82...
- Page 6 Injuries and damage to property due to broken cutting attachments or the sudden impact of hidden objects during use. Danger of injury and property damage caused by other objects or due to natural reactions or calamities. IBL HG20-82 IBL DS80-70|90...
-
Page 7: Heat Gun Safety Warnings
Remove the plug from the socket before carrying out any adjustment, servicing or maintenance. Misuse or failure to follow the safety rules stated in WARNING! this instruction manual may cause serious personal injury. IBL HG20-82... -
Page 8: Product Specifications
PRODUCT SPECIFICATIONS Rated voltage : 230V~50Hz Rated Input Power : 2000W Temperature : 1. 350ºC | 2. 550ºC Air Flow : 1. 250 L/min | 2. 550 L/min Protection class : Class II : 0.67 Kg Weight INTENDED USE This Heat gun is an electric device used to emit a stream of hot air, usually at temperatures between 100 °C and 550 °C, which can be held by hand. -
Page 9: Product Overview
3. Air intake vents The product must be fully assembled before operation! Do WARNING! not connect the product to power supply before it is completely assembled! Use the above picture as a guide for its components! IBL HG20-82... - Page 10 This is ideal for window sills, ledges and frames. Concentrator nozzle: This nozzle directs a concentrated heat flow to the work piece. It is ideal for use when removing paint in irregular corners, moulding, beading, or wherever precise paint removal is required. IBL HG20-82...
-
Page 11: Product Functions And Assembly
When the heater is overloaded, the unit switches it OFF NOTE: automatically, however, the blower continues to run. When the unit has cooled to operating temperature, the heater switches ON again. IBL HG20-82... -
Page 12: General Operation
Move the unit slightly ahead of the scraper to assure that the paint being stripped is softened. Best results will be achieved if the gun is moved slowly, constantly, side to side to evenly distribute heat. IBL HG20-82... - Page 13 Never let any liquid get inside the tool; never immerse any part of the tool into a liquid. Never clean nozzle or air holes in the gun with sharp metal objects. Do not use solvents or lubricants containing silicone. IBL HG20-82...
-
Page 14: Troubleshooting
1.4 Have the cord or 1.4 Cord or switch is switch checked by a damaged. qualified technician, if required replace it. IBL HG20-82... - Page 15 Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice. Do not dispose this product by normal household waste, but take it to a collection point and recycling of electrical and electronic equipment.