Brookstone Fingerprint Lock User Manual page 7

Adding second through tenth fingerprints
1. Press and hold the fingerprint collection
window until it flashes blue once. Then
remove finger and it will show a long blue
flash.
2. While the blue light is a long flash, it will
need to verify the administrator's fingerprint.
Once the administrator's fingerprint is
scanned the green light will start flashing
after.
3. When the green light starts flashing, press
the finger you want to use 10 times
repeatedly. Try and touch different
parts of you fingerprint each time. When the
green light shows a long flash, it means it
registered your fingerprint successfully.
During set up process, if you wait 5 seconds
without touching the fingerprint collection
window, the set up process will time out.