Advertisement
5
H
Option
B
J
Check that hot & cold supply hoses are connected correctly to hot
& cold supplies. Option: If applicable, Adapters (J) can be used to
accomodate 1/2'' shut off valves.
7
Outlet Hose
I
Remove and discard Plastic Cap from end of Pullout Hose (I) ,
install Pullout Hose (I) to Outlet Hose. Push in as far as possible
until a "click" is heard. Note: To release the installation, you can
press the switch and pull down at the same time.
Cold
Hot
Or
Plastic Cap
6
B
Insert Pullout Hose (I) into opening and feed through Faucet Body
(B) until wand is docked Note: Do not remove the Plastic Cap of
Pullout Hose (I) first during installation.
8
I
Install Hose Weight (M) between bottom of loop curvature and
white tape of Pullout Hose (I). Note:The installation of Hose
Weight must ensure that the pull-out function works well.
4
I
Install zone
Advertisement
