Advertisement
Table of Contents
- 1 Connect the Pump to the AC System.
- 2 Turn Power Switch on and the Screen will Light Up.
- 3 Press the Start Button to Run Pump.
- 4 Press the Start Button to Stop Pump if Necessary.
- 5 Turn Power Switch off and Disconnect the Power Cord.
- 6 Note: the Beep will Sound 30 Minutes after Reaching 500 Micron.
- Download this manual
5 Commonwealth Ave
Woburn, MA 01801
Phone 781-665-1400
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com
A�VAC
Making Your Job More Enjoyable
NRP6D
NRP8D
Smart Vacuum Pump
User Guide
Making Your Job More Enjoyable
1. Connect the pump to the AC system.
1/4"
A�VA.C
Making Your Job More Enjoyable
2. Turn power switch on and the screen will light up.
1/2"
3/8"
A�VA.C
Advertisement
Table of Contents
Summary of Contents for Test Equipment Depot NRP6Di
- Page 1 5 Commonwealth Ave A�VA.C A�VA.C Woburn, MA 01801 Making Your Job More Enjoyable Making Your Job More Enjoyable Phone 781-665-1400 Toll Free 1-800-517-8431 1. Connect the pump to the AC system. 2. Turn power switch on and the screen will light up. Visit us at www.TestEquipmentDepot.com 1/2"...
- Page 2 A�VAC A� A�VAC Making Your Job More Enjoyable Making Your Job More Enjoyable Making Your Job More Enjoyable 3. Press the Start button to run pump. 5. Press the Start button to stop pump if necessary. 6. Turn power switch off and disconnect the power cord. 4.
Need help?
Do you have a question about the NRP6Di and is the answer not in the manual?
Questions and answers