Table of Contents
Advertisement
Quick Links
POWERED ELECTRONIC LOCK
ESCUTCHEON DISPLAY
99.688 - 99742
GENERAL WARNINGS
Mottura Serrature di Sicurezza S.p.A. thanks you for choosing this product and reminds you:
- to read these instructions very carefully before installing and using this product and before doing any maintenance.
- the escutcheon display is sensitive to electrostatic discharges that may come from your body; before handling the escutche-
on, make sure you have taken all precautions to prevent it from being permanently damaged by an electrostatic discharge.
- to keep these instructions for future use and attach the sales receipt to validate the warranty.
- In case of problems, contact your authorized dealer only.
"DO NOT use a liquid, spray, or wet cloth to clean the escutcheon! If liquids enter the scanner, they will oxidize and permanently
damage its components. Use a dry cloth only. DO NOT paint the escutcheon with any method or substance. Failure to follow
these instructions will immediately void the warranty."
Mottura Serrature di Sicurezza S.p.A. may change the characteristics of the products described in these instructions at any time
and without notice.
ESCUTCHEON FUNCTIONS
Unless otherwise specified, all of the functions described in this manual refer to both PROTECTED-duplication and FREE-duplication
TAGS (transponder keys).
The escutcheon with color display can be connected to Mottura's powered "XMODE" lock on the inside of the door to replace
the 3-key escutcheon. It can be used to open and close the lock from inside the door, and can fully manage all of the available
lock functions plus the ones used by means of the internal 3-key escutcheon. Specifically, this visual interface displays lock
movement phases (opening and closing), any errors that may be generated during these phases, lock and door status, power
supply status, and programming access.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Mottura Xmode 99688
- Page 1 TAGS (transponder keys). The escutcheon with color display can be connected to Mottura’s powered “XMODE” lock on the inside of the door to replace the 3-key escutcheon. It can be used to open and close the lock from inside the door, and can fully manage all of the available lock functions plus the ones used by means of the internal 3-key escutcheon.
-
Page 2: Table Of Contents
CONTENTS THE ESCUTCHEON ..........................pag. 3 OPENING AND CLOSING THE LOCK ......................CHANGING THE DISPLAY LANGUAGE ...................... PROTECTED TAG SYSTEM ..........................4.1 - DELETING A SINGLE TAG 4.2 - DELETING ALL TAGS 4.3 - ENTERING A SERVICE TAG 4.4 - ENTERING A MASTER TAG 4.5 - MEMORIZED TAG ATTRIBUTES FREE TAG SYSTEM ............................ -
Page 3: The Escutcheon
1. THE ESCUTCHEON TYPE OF POWER SUPPLY OPERATION IN PROGRESS PROGRESS OF OPERATION TAG NO. USED (FOR PROTECTED SYSTEM ONLY) FUNCTION KEYS LANGUAGE EXECUTE ” KEY RED LED GREEN LED 99742 - Rectangular version 2. OPENING AND CLOSING THE LOCK Press the “E”... -
Page 4: Changing The Display Language
3. CHANGING THE DISPLAY LANGUAGE (if not necessary, go to chapter 4) At door open, press any Functions screen Press until (Other fun- (Menu). arrow key press ctions) and press "E". activate the menu. PROTECTED SYSTEM ... -
Page 5: Protected Tag System
4. PROTECTED TAG SYSTEM (if not necessary, go to chapter 5) In a system with protected key (TAG) duplication, all keys are supplied as MASTERS. 4.1 DELETING A SINGLE PROTECTED TAG At door open, press any Functions screen Press "E" (TAG Keys). ... -
Page 6: Deleting All Tags
4.2 DELETING ALL TAGS - PROTECTED SYSTEM At door open, press any Functions screen Press "E" (TAG Keys). (Menu). arrow key press activate the menu. Place system CARD (GREEN) Recognition of CARD. Press to scroll menu. on external escutcheon. Press "E"... -
Page 7: Entering A Service Tag
4.3 ENTERING A SERVICE TAG At door open, press any Functions screen Press "E" (TAG Keys). (Menu). arrow key press activate the menu. Place system CARD (GREEN) Recognition of CARD. Press to scroll menu. on external escutcheon. ... -
Page 8: Entering A Master Tag
4.4 ENTERING A MASTER TAG At door open, press any Functions screen Press "E" (TAG Keys). (Menu). arrow key press activate the menu. Place system CARD (GREEN) Recognition of CARD. Press to scroll menu. on external escutcheon. ... -
Page 9: Memorized Tag Attributes
4.5 MEMORIZED TAG ATTRIBUTES (FOR PROTECTED SYSTEMS ONLY) At door open, press any Functions screen Press "E" (TAG Keys). (Menu). arrow key press activate the menu. Place system CARD (GREEN) Recognition of CARD. Press to scroll menu. on external escutcheon. - Page 10 Press to scroll memori- Press to display next Press (Move) to select zed TAG. TAG (no. 127) with its at- attribute. Press to change TAG tributes. Press to change value attributes, "E" to return to previous Press to change TAG attributes.
-
Page 11: Free Tag System
5. FREE TAG SYSTEM In a system with free key (TAG) duplication, all the supplied keys must be registered. 5.1 ENTERING A MASTER TAG At door open, press any Functions screen Press "E" (TAG Keys). (Menu). arrow key press activate the menu. -
Page 12: Entering A Service Tag
5.2 ENTERING A SERVICE TAG At door open, press any Functions screen Press "E" (TAG Keys). (Menu). arrow key press activate the menu. Place any TAG (only if a new Recognition of CARD. Press to scroll menu. system*) or a MASTER TAG on external escutcheon. -
Page 13: Deleting Single Tag
5.3 DELETING SINGLE TAG At door open, press any Functions screen Press "E" (TAG Keys). (Menu). arrow key press activate the menu. Place MASTER TAG on exter- Recognition of CARD. Press to scroll menu. nal escutcheon. Press "E" (Remove TAG). Place TAG to delete on exter- TAG deleted. -
Page 14: Deleting All Tags
5.4 DELETING ALL TAGS At door open, press any Functions screen Press "E" (TAG Keys). (Menu). arrow key press activate the menu. Place MASTER TAG on exter- Recognition of CARD. Press to scroll menu. nal escutcheon. Press "E" (Remove ALL tag). Press "E"... -
Page 15: Disabling Service Tag (Free/Protected Tag System)
6. DISABLING SERVICE TAG (FREE/PROTECTED TAG SYSTEM) At door open, press any Functions screen Press "E" (TAG Keys). (Menu). arrow key press activate the menu. Place System CARD PROTECTED SYSTEM (PROTECTED SYSTEM) Recognition of CARD. MASTER TAG (FREE SYSTEM) ... -
Page 16: Enabling Service Tag (Free/Protected Tag System)
7. ENABLING SERVICE TAG (FREE/PROTECTED TAG SYSTEM) At door open, press any Functions screen Press "E" (TAG Keys). (Menu). arrow key press activate the menu. Place System CARD PROTECTED SYSTEM (PROTECTED SYSTEM) Recognition of CARD. MASTER TAG (FREE SYSTEM) ... -
Page 17: Quick Lock Status Information - Door Open
8. QUICK LOCK STATUS INFORMATION - DOOR OPEN At door open, press any Functions screen - DOOR STATUS - LOCK STATUS arrow key press (Status). - WORK MODE activate the menu. - POWER STATUS 9. QUICK LOCK STATUS INFORMATION - DOOR CLOSED At door open, press any - DOOR STATUS - LOCK STATUS... -
Page 18: External Keypad Codes
11. EXTERNAL KEYPAD CODES IMPORTANT: this choice is always available, but is valid only if the external keypad is present. Selecting this item in the absence of the keypad has no effect on keypad management of codes. Remember that code insertion from the keypad can be managed directly from the external escutcheon, as described in the XMODE lock USER manual (Chapter 8 –... -
Page 19: Inserting Codes
11.2 INSERTING CODES Press "E" Press to insert (Insertion codes). code. Insert code from external keypad (min. 3 - max. 8 digits), then press "E". You can insert multiple codes from the external keypad without additional confirmations on the display (max. 100 codes). When insertion is done, press "E"... -
Page 20: Deleting All Codes
11.4 DELETING ALL CODES Press "E" (Remove Warning. Press to delete all ALL codes). codes in memory. Wait time. Message: all codes have been deleted. 11.5 PREVIOUS MENU Press "E" to return to the main menu. 99298 - XMODE - ESCUTCHEON DISPLAY - REV. 01... -
Page 21: Changing Lock Closing Mode
12. CHANGING LOCK CLOSING MODE At door open, press any Functions screen Press until (Other fun- (Menu). arrow key press ctions) and press "E". activate the menu. PROTECTED SYSTEM Place system CARD (GREEN) PROTECTED SYSTEM or MASTER TAG (ORANGE Recognition of CARD. -
Page 22: Parental Security Codes
13. PARENTAL SECURITY CODES At door open, press any Functions screen Press until (Other fun- (Menu). arrow key press ctions) and press "E". activate the menu. PROTECTED SYSTEM Place system CARD (GREEN) PROTECTED SYSTEM or MASTER TAG (ORANGE Recognition of CARD. -
Page 23: Opening / Closing Lock On Inside
13.1 OPENING / CLOSING LOCK ON INSIDE Press "E". Use the keys to enter If entered code is correct, Code request. the set code. Enter in lock starts opening ope- case of error. ration. If entered code is incorrect, error message is displayed. -
Page 24: Courtesy Times
14. COURTESY TIMES Sets the waiting time for CLOSING of bolts in “AUTOMATIC CLOSING” mode and the waiting time for release of the SPRING LATCH if the door stays ajar. At door open, press any Functions screen Press until (Other fun- ... -
Page 25: Date And Time
15. DATE AND TIME At door open, press any Functions screen Press until (Other fun- (Menu). arrow key press ctions) and press "E". activate the menu. PROTECTED SYSTEM Place system CARD (GREEN) PROTECTED SYSTEM or MASTER TAG (ORANGE Recognition of CARD. -
Page 26: Time Slot Back Stop
16. TIME SLOT BACK STOP This function lets you switch from the work mode set on the lock (AUTOMATIC, OPEN/CLOSE, or LATCHBOLTS ONLY) to DAY CLOSURE mode (closing of door with lock spring latch only) for a time interval that you can program as necessary. When the time expires the previously set mode is restored. - Page 27 Press "E" to enter program- Press (Change) to Press "E" to set single time ming, to reset data and select Day, (Status) to slots. Press " " (Reset) to to exit. enable (YES/NO) time slots reset all of the values shown ...
-
Page 28: Delete A Single Time Slot
Press to set Do not set data and press Summary screen of settin- values 15.00 (START) "E" to confirm. gs for TUESDAY. 19.00 (END) - YES (ON). Press "E" to set time slots Press "E" to confirm and go to for other days of the week. -
Page 29: Delete Time One Day Slot
16.2 DELETE TIME ONE DAY SLOT Go to the screen with the Summary screen with reset Press "E" to confirm changes. time slot values to be reset. time slots. Press "E" to return Press (Reset). to Day selection screen. 16.3 DELETE ALL TIME SLOTS ... - Page 30 17. TAGS IN TIME SLOT ATTENTION: this function is available ONLY for protected TAG systems (GREEN Card + YELLOW Card). For access control, you have to assign one or more TAG keys to a group (maximum 6 groups). The groups are named with letters (A, B, C, D, E, F), and each group can be assigned four time slots for each day of the week. IMPORTANT: the clock/calendar must be set correctly before set time slots.
- Page 31 At door open, press any Functions screen Press until (Other fun- arrow key press (Menu). ctions) and press "E". activate the menu. Place System CARD (GREEN) CARD recognized. Select "TIME SLOT KEYS" on external escutcheon. menu with press "E".
-
Page 32: Deleting A Single Time Slot
Press to set va- Setting completed, press Select Day with lues of START (18.00), END "E" to change Day. (Change), (Input) (20.00). Press "E" to confirm program time slots. Do the and go to next SLOT. same for other days. After entering data for the Program time slots for When all settings are... -
Page 33: Deleting Time Slots On One Day
17.2 DELETING TIME SLOTS ON ONE DAY Go to the screen with the Summary screen with reset Press "E" to confirm changes. time slot values to be reset. time slots. Press "E" to return Press (Reset). to daily selection screen. 17.3 DELETING ENTIRE USER GROUP ... -
Page 34: Access Control
18. ACCESS CONTROL At door open, press any Functions screen Press until (Other fun- (Menu). arrow key press ctions) and press "E". activate the menu. PROTECTED SYSTEM Place system CARD (GREEN) PROTECTED SYSTEM or MASTER TAG (ORANGE Recognition of CARD. -
Page 35: Deleting All Access Control Information
18.1 DELETING ALL ACCESS CONTROL INFORMATION Press (Data reset) to dele- Press "E" to confirm. The system memorizes the te all data. deletion and returns to the FUNCTIONS menu. After deletion, the system in- or with a new forms you that lock, press E .. -
Page 36: Exiting The Menu
Information on status of Information on system num- Information on number of power supply and battery ber. Press to go to the next operations performed by charge level (if present). screen. lock. Press to go to the Press to go to the next screen. -
Page 37: Troubleshooting
21. TROUBLESHOOTING PROBLEM CAUSE REMEDY Unknown TAG or not registered TAG. Register the TAG. (TAG …..???) See paragraph 4.3/4.4 if PROTECTED TAG system. See paragraph 5.1/5.2 if FREE TAG system. FOR PROTECTED SYSTEM ONLY Use a registered TAG. TAG used is System CARD (GREEN – Ow- ner’s Card). - Page 38 PROBLEM CAUSE REMEDY Attempted operation without service Mount cylinder. cylinder; message applies only to lock mo- dels with mechanical antiburglar device. IN A PROTECTED SYSTEM When requested, place SYSTEM CARD (gre- CARD placed on external escutcheon du- en) on external escutcheon. ring PROGRAMMING is not the SYSTEM CARD (green card).
- Page 39 PROBLEM CAUSE REMEDY IN A PROTECTED SYSTEM Attempt to delete TAG that is not on exter- nal escutcheon, or attempt to delete TAG not belonging to system or anyway not valid. IN A FREE SYSTEM Place MASTER TAG (first TAG inserted in With MASTER TAG already memorized, the system) on external escutcheon when re- TAG placed on external escutcheon during...
- Page 40 You have set an END time that is earlier than START time. TIME SLOT KEY Reset time slot. You have set a START time for the second time slot earlier than the END time of the preceding time slot. www.mottura.it...
Need help?
Do you have a question about the Xmode 99688 and is the answer not in the manual?
Questions and answers