Subscribe to Our Youtube Channel
Summary of Contents for Anova A Series
- Page 1 Anova Industries Houston TX USA TEL: 281-277-2202 FAX: 281-277-0229 www.waterbaths.com info@waterbaths.com Operating Manual Refrigerated and Heating Circulators – A Series...
- Page 2 This manual covers basic operational usage of our circulators. For optimal utilization of all functions, we recommend that you thoroughly study this manual prior to beginning operation. Anova does not directly support OEM systems or system branded for other companies. OEM systems may contain different specifications and features that are not covered in this manual.
- Page 3 Wait 24 hours before Power On for Max Cooling Capacity on Refrigerated Systems Immediately report damage to Anova and the responsible carrier. Failures to report transport damage will not allow us to support your claim for insurance.
-
Page 4: Table Of Contents
TABLE OF CONTENTS Introduction Safety Application safety Installation Safe Bath fluids Filling procedures Disposal Technical specifications Operating controls and functional elements 11-12 Computer control (RS232 Operation) 13-14 Maintenance Warranty... -
Page 5: Introduction
This includes food, tobacco, pharmaceutical and other consumed organic products. Do not use Anova circulators to directly cook food – at no time should food products come in contact with bath fluid. Food must by vacuum-sealed before use with circulator. -
Page 6: Safety
Do not circulate cold fluid into hot glassware Do not set safety temperature limiter above fluid flash points. Anova is not responsible for any damage that might result from examples similar to above BURN HAZARD Do not touch connectors and bath cover or fluids when bath is under high temperature OBSERVE ALL WARNING LABELS ON PRODUCT Read all labels on product to ensure proper usage. -
Page 7: Application Safety
Application Safety: Temperature controlling the contents of a reactor constitutes normal circulator practice. However, we do not know what substances are contained within reactor vessels and cannot help with determining the safety of your applications. Many chemicals are: ● Flammable or explosive ●... -
Page 8: Filling Procedures
• Lab distilled and deionized water can cause corrosion if used long term, even in stainless steel. Fire or other dangers when using bath fluids that are not recommended: Please contact Anova before using other than recommended bath fluids. Anova assumes no liability for damage caused by the selection of an unsuitable bath liquid. -
Page 9: Disposal
Disposal This product uses bath fluids that might partially consist of mineral oil or synthetic oil. For disposal, observe the instructions in the safety data sheets. Some systems contains common refrigerants found in household products please contact your local waste management company to determine disposal requirements. -
Page 10: Technical Specifications
Technical specifications System Temperature Min °C Temperature Max °C ± .01ºC ± .01ºC ± .01ºC ± .01ºC ± .01ºC ± .01ºC ± .01ºC Stability Heater Power 15LPM 15LPM 15LPM 15LPM 15LPM 15LPM 15LPM Circulation Pump 120V 120V 120V 120V 120V 120V 120V Input power... -
Page 11: Operating Controls And Functional Elements
Operating controls and functional elements 1) LCD with touchpad 2) Control Keypad 3) Indication LEDS 4) Temperature Display 5) Safety Dial Temperature Limiter 6) Bath Opening 7) Power Switch 8) Power Connector 9) Fuse 10) RS232 Port 11) Circulation Inlet/outlet... - Page 12 7) Start/Stop 8) Temperature LED Indicator / Safety Dial 9) Power Switch 10) Power Plug – Please used use Anova supplied heavy duty power cord 11) Fuse – (location may vary) 12) RS232 Port – for PC control 13) Circulation Inlet/outlet...
-
Page 13: Computer Control (Rs232 Operation)
Computer Control (RS232 Operation) Cable Requirements In order to interface to a PC you need the following hardware cable pictured below: DB9 Serial Cable Male to Female – Strait though configuration. Do not purchase a “Null Modem,” “crossover,” or “Crossed over” cables. Before interfacing with a PC, make sure a RS232 port exists on your PC. - Page 14 Most programming packages like LabView, LabWindows and Visual Studio will allow you to program comport settings dynamically in program. RS232 Commands Note: All Rs232 commands are not case sensitive. Do not include quotation marks when entering in commands. Commands are "initiated" by a carriage return.
-
Page 15: Maintenance
Caution: General Information • Always turn off the unit when not in operation. • Electrical connections and any other work must be performed by Anova certified personnel only. Maintaining Cooling Performance Coolant Maintenance 1. Power off chiller and open chiller reservoir drain port. -
Page 16: Warranty
2. Use appropriate coolant – no acid/base solutions or salts. Failure to comply with aforementioned requirements will result in voidance of manufacturer’s warranty. The following Warranty Provisions shall apply to products sold in North America by Anova (“Seller”) to the entity shown as buyer (“Buyer”) on Seller’s invoice.
Need help?
Do you have a question about the A Series and is the answer not in the manual?
Questions and answers