Download Print this page

Solvit Hammock Style Seat Cover Care/Use Manual

Hammock Style Seat Cover

Care & Use Guide

Congratulations on the purchase of your new Solvit Products Hammock Style Seat Cover. This

cover is designed to fit all automotive rear seat areas.

INSTALLATION: The cover is held in place at the top by

means of two adjustable web straps which go around the rear

headrests and two adjustable straps which go around the front

head rests. There are two sets of four grommet positions on

both edges of the cover, which allow for various headrest

configurations. Lay the cover in place on the rear seat and

choose the grommet positions which best match the location

of each headrest. Position and fasten the cover to the rear

headrests first. Loop each strap around its respective headrest

and attach it to these grommets. Using the metal slider,

adjust the length of each strap to achieve the best fit.

Next, locate the two Sta-put™ devices on the underside of the seat cover. These consist of a

short piece of plastic tubing attached to the cover by a short strap. Push the tube into the crevice

Table of Contents

Need help?

Do you have a question about the Hammock Style Seat Cover and is the answer not in the manual?

Page 1 Hammock Style Seat Cover Care & Use Guide Congratulations on the purchase of your new Solvit Products Hammock Style Seat Cover. This cover is designed to fit all automotive rear seat areas. INSTALLATION: The cover is held in place at the top by...
Page 2 CAUTION: Always make sure the vehicle seat is dry before installing the Solvit Hammock Style Seat Cover. Warranty: The Hammock Style Seat Cover is warranted to be free from defects in materials or workmanship for a period of one (1) year from date of purchase. A copy of the original sales receipt is required for warranty issues.