COMPTEST SA-4642-0001 Install Manual

For Assistance
techhelp@comtestnetworks.com
Comtest Networks Inc.
PD-4642-0021 Rev A.0 02-Sept-20
1. Package Contents
Thank you for purchasing Comtest Networks Industrial IEEE 802.3at
Gigabit High Power over Ethernet Splitter, SA-4642-0001.
Open the box of the Industrial 4-port IEEE 802.3at Gigabit High Power
over Ethernet Splitter and carefully unpack it. The box should contain
the following items:
•
Industrial IEEE 802.3at Gigabit High Power over Ethernet Splitter
x 1
•
Two-pin terminal block connector x 1
If any of these are missing or damaged, please contact your dealer
immediately; if possible, retain the box including the original packaging
material, and use them to repack the product in case there is a need
to return it to us for repair.
1-877-369-5499
comtestnetworks.com
- 1 -
PoE Splitter Install Guide
SA-4642-0001
2. Product Features

Interface
•
2 RJ-45 interface:
•
PoE Power + Data input
•
Data output
•
Powered DC out (2-pin Terminal Block) [12V DC].
•
Ground lug (6 to 14AWG)

Power over Ethernet Splitter
•
Complies with IEEE 802.3at Power over Ethernet protocols
•
Converts the 48~56V DC power input, over RJ-45 Ethernet
cable, into 12V DC output
•
A single Power Injector (SA-4641-0001) can be used
•
Each Ethernet port is isolated, from a data perspective, and
functions as a pass through, for the Ethernet data, while
directing the power, from the PoE inputs, to the Power DC
out
•
Auto-detects if incoming power PoE IEEE 802.3at compliant
•
-40 to 75 degrees C operating temperature
•
Data Rate: 10/100/1000Mbps
- 2 -