Table of Contents
Advertisement
respectively,are then incrementally displayed. If
you continue to press the Usage key, accumu-
lated usage values are repeated for rates 1
through 4.
Press the Run Program key to stop viewing
usage.
Current day usage is automatically cleared at
midnight. To clear an accumulated value, press
the Usage key until the value you want to clear
is displayed and then press the Clear key. If you
subscribe to Time-of-Use Pricing, your utility can
also clear the accumulators by sending a
message to the thermostat.
Permanently Change a Program
To permanently change a program, repeat the
appropriate steps in Programming Your Thermo-
stat.
Return to Normal Program or Start Program
Any time you want to return to the normal
program or start the program, press the Run
Program key. If you temporarily changed the
temperature or you used the Hold Temp key,
pressing the Run Program key will cancel your
change.
Change Fan or System Control Settings
Change the fan setting by pressing the Fan key.
Each time you press the key, the fan status
17
69-1153
Hide quick links:
Advertisement
Table of Contents
