Page 1
SCAFFOLD & LADDER SYSTEMS OperatiOnal Safety and aSSembly inStructiOnS fOr WHdp Heavy duty WOrk platfOrmS WHDP Heavy Duty Work Platform users of the easy access Heavy Duty Work Platforms - please read the following instructions carefully and do not operate the platform until the instructions have been read and understood.
Page 2
ComPonentS Wheel Assembly x 2 Ladder Handrail x 2 Back Leg Frame tools required • carpenters square • Socket wrench or impact driver and 17mm socket • Soft-headed mallet • 17mm ring spanner Side Braces x 2 (4x for WHDP09 and larger platforms) •...
Page 3
aSSemBly InStruCtIonS SteP 4: Bottom Side Braces the Side braces attach to the inside faces of the back leg (6) and ladder (7) frames. insert t-bolts into the holes in the bracket end plates and finger tighten 10mm nyloc nuts to the t bolts. insert the t bolt heads into the slots in the ladder frame extrusion, twist clockwise to lock them and tighten the nuts firmly.
Page 4
TO USING IT. tHank yOu fOr takinG tHe time tO read tHeSe inStructiOnS, and fOr purcHaSinG tHe eaSy acceSS WHdp Heavy duty WOrk platfOrm. the manufacturers or supplier will not accept liability for injury or damage resulting from product failure...