Summary of Contents for Unitec TVS Standard 1B
- Page 1 TVS Standard 1B, 2B, 2 BPG and 3BPG Needle Scalers Operation and Maintenance Manual 1-800-700-5919 (US/CA) +1-203-853-9522 (Intl.) WWW.CSUNITEC.COM info@csunitec.com...
- Page 2 DECLARATION OF CONFORMITY Trelawny SPT Limited of Trelawny House, 13 Highdown Road, Sydenham Industrial Estate, Leamington Spa, Warwickshire, CV31 1XT, United Kingdom, Declare that under our sole responsibility for supply/manufacture of the product Name of product ______________________________________ Model, Serial Number ______________________________________ Year of production ______________________________________...
- Page 3 1-800-700-5919 (US/CA) +1-203-853-9522 (Intl.) WWW.CSUNITEC.COM info@csunitec.com...
-
Page 4: Operation
OPERATION General Information Safety We are not aware of any PPE that provides protection against vibration injury Before operating, performing maintenance or Always, read through these instructions first attenuating vibration emissions. repairing the TVS Needle Scaler this manual before use. must be read and understood by the operator, See ‘Specifications’... -
Page 5: Maintenance
MAINTENANCE Never allow the tool to run continuously Pointed tip needles whilst not in contact with the surface being Sharpened to a nail point, these are most prepared. effective in breaking through very hard scale on surfaces where some surface indentation is permissible - or where keying (i.e. - Page 6 SERVICING Noise and Vibration Machinery Directive Hold the Cylinder (10) firmly in a vice, using the flats provided and with the Valve Information Assembly uppermost, unscrew the cover (14) UK employers should be aware of their duties from the cylinder (10). under the Health &...
-
Page 7: Exploded View
EXPLODED VIEW Service Layout Style A 1-800-700-5919 (US/CA) +1-203-853-9522 (Intl.) WWW.CSUNITEC.COM info@csunitec.com... - Page 8 1B & 2B TVS PARTS LIST Item Part No Description Item Part No Description Common Components 712.1001 Spring - Compression 615.3021 Valve Cap 416.1092 Intermediate Tube (Includes item 30) 809.0139 O’ Ring – Valve Cap 806.0825 Cap Head Screw 712.3022 Valve Spring 419.1241 Chisel Holder 1/2”...
- Page 9 EXPLODED VIEW Service Layout Style B...
- Page 10 2BPG & 3BPG TVS ONLY PARTS LIST Item Part No Description Item Part No Description Common Components 712.2001 Spring - Compression 615.3021 Valve Cap 416.2099 Intermediate Tube TVS (Includes item 30) 809.0139 O’ Ring – Valve Cap 806.0830 Cap Head Screw 712.3022 Valve Spring 419.2241 Chisel Holder 1/2”...
-
Page 11: Specification
SPECIFICATION Model Type 1B TVS ONLY 2B TVS ONLY 2BPG TVS ONLY 3BPG TVS ONLY Piston Diameter 18mm (0.17”) 23.5mm (0.925”) 23.5mm (0.925”) 28.6mm (1.125”) Piston Stroke 30.0mm (1.18”) 35.6mm (1.4”) 35.6mm (1.4”) 39.0mm (1.535”) Blows per Minute 3800 3000 3000 2200 Air Consumption (1/4”BSP Air Inlet) - Page 12 CS Unitec, Inc. 22 Harbor Ave, Norwalk, CT, 06850, USA 4330 Center St., Deer Park, TX., 77536, USA Telephone: +1 203-853-9522 / 800/700-5919 - Fax: 203-853-9921 Email: info@csunitec.com © TSPT UK 2015 Part No: 735.3050 issue 3.11.16...