Advertisement
1
Connect the RV50 and the adapter to the Port B
connection on the Ag Leader 6500/7500 cabling
Note: The null modem cable is needed for all modems
3
Tap the Setup wrench icon, then the
4
From the GPS/Guidance setup screen, select the
wrench icon next to "Autodetect"
MD5005
Ag Leader 6500, 7500 & RV50
Ag Leader 6500 & 7500 Display Setup
icon
rev 6
Quick Reference Card
2
Connect the Power Tee to the Can B power/
terminator connection on the Display cable
5
Ensure the Differential source is set to "RTK external"
DigiFarm Technical Support
319.531.7574
support@digifarm.com
DigiFarm
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Ag Leader 6500
- Page 1 DigiFarm Quick Reference Card Ag Leader 6500, 7500 & RV50 Ag Leader 6500 & 7500 Display Setup Connect the RV50 and the adapter to the Port B Connect the Power Tee to the Can B power/ terminator connection on the Display cable...
- Page 2 DigiFarm Quick Reference Card Ag Leader 6500, 7500 & RV50 *Note- If this unit was ordered with a subscription, it will be preprogrammed and plug and play ready. The following instructions will not be needed. Log into the device via WAN static IP (166.XXX.XXX.XXX:8080) or LAN connection (192.168.1.1:8080) on Port 8080.
Need help?
Do you have a question about the 6500 and is the answer not in the manual?
Questions and answers