Jamesway Platinum 2.0 Operation Instruction Manual

Jamesway Incubator Company
JIC-INSTP2-00004 Step 1
JIC-INSTP2-00004 Step 2
Part Name / Description:
Platinum 2.0 Center ECU Support
Operation Instruction Title:
Platinum Centre ECU Support
It is best to have the Center ECU supports
partially assembled and ready to install
into the machines before the roof panels
start going up.
Open the FB6278 pack and inventory to
ensure the following components are
present:
Part # #
PB5947
MB20117
MB20006
MB20007
MB20130
MB20131
MB20134
AB7499
AB7503
AB7564
AB7565
AB7419
PB4590
FB6393
Insert 2x AB7493 Nut Plate weldment into
the AB7419 ECU center support assembly.
The nut side should go into the leg. It may
have to be hammered in place.
Ensure the nut is centered in the leg.
Instruction #:
JIC-INSTP2-00004
Revision Date: 04/03/2018
Revision No. A
Description
4 Pipe - ECU Centre Support
2 Plate - Front Support
1 Support - Leg L.H.
1 Support - Leg R.H.
2 Cover - Intake Duct
1 Duct - Intake - L.H.
1 Duct - Intake - R.H.
1 Damper - Intake
1 Shipping Pack - Centre
Support Hardware Pack
2 Valve - P120 Solenoid
2 Check Valve - P120
1 Support - ECU Centre
7 Conduit - .500" PVC
1 Pack - Plat Egg Centre
Support
Page 1 of 17
Page 1 of 17
Revised By: V. Frail
Approved By: S. Ditner
Throughout:
Safety Shoes
Safety Glasses
Hearing
protection as
required
Additional
equipment as
required by the
site
Hammer