Table of Contents
Advertisement
Quick Links
DISPOSER CONTROL CENTER
Installation Manual
Model CC-202D
WARNING indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury.
NOTICE is used to address practices not related to physical injury.
Please be certain that the person who installs or uses this appliance carefully reads
and understands the Safety Instructions contained in this manual.
www.insinkerator.com/foodservice
Part No. 15332 Rev. B
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for InSinkErator CONTROL CENTER CC-202D
- Page 1 NOTICE is used to address practices not related to physical injury. Please be certain that the person who installs or uses this appliance carefully reads and understands the Safety Instructions contained in this manual. www.insinkerator.com/foodservice Part No. 15332 Rev. B...
-
Page 3: Table Of Contents
The warranty includes parts and labor, provided the service is performed by an InSinkErator Factory Authorized Service Center. This warranty does not apply if failure is due to: faulty or improper electrical installation, faulty or improper plumbing installation, product abuse or misuse, or accidental damage. -
Page 4: Introduction/Features/Mounting Control Center
US listed for use ® Use the flanges at the back of the control center with InSinkErator Foodservice Disposers. See Table 1 enclosure and only mount panel in the upright vertical for approved disposer and control center combinations position (door hinge is on the left). See Figure 1. -
Page 5: Plumbing Connections
Plumbing Connections Figure 2. Typical Installation Diagram PLUMBING CONNECTIONS The flow control valve, syphon breaker and solenoid valve are supplied with all complete disposer packages (packed separately). Make certain that the solenoid valve supplied is the proper voltage. Make certain that the valves are plumbed according to water flow direction arrows marked on valves or the valves will not function properly. -
Page 6: Electrical Connections
Electrical Connections/Time Delay Relay ELECTRIC SHOCK PROPERTY DAMAGE • Turn off the electrical supply to the disposer before • Ensure that control center voltage and phase attempting any work on it. Use a voltmeter or match the disposer motor and electrical supply. circuit tester to ensure that power is off. -
Page 7: Operating Instructions/Troubleshooting
If trouble still persists, call your nearest In case of trouble, check the items listed below InSinkErator Authorized Service Agency. A. Disposer motor will not start and water For the location of your nearest service does not flow. -
Page 8: Model No. Cc-202D-5 (120V, 1 Phase, 1/2 - 2 Hp)
• Black wires = Line voltage (208 - 240 V) control. CC-202D-5 120 V 1-phase 1/2 to 2 HP Call Toll Free 1-800-845-8345 for the nearest InSinkErator Authorized Service Agency or to reach Technical Support. -
Page 9: Model No. Cc-202D-6 (208/240V, 1 Phase, 1/2 - 2 Hp)
• Black wires = Line voltage (208 - 240 V) control. CC-202D-6 208/240 V 1-phase 1/2 to 2 HP Call Toll Free 1-800-845-8345 for the nearest InSinkErator Authorized Service Agency or to reach Technical Support. -
Page 10: Model No. Cc-202D-7 (208/240V, 3 Phase, 1/2 - 10 Hp)
• Black wires = Line voltage (208 - 240 V) control. CC-202D-7 208/240 V 3-phase 1/2 to 10 HP Call Toll Free 1-800-845-8345 for the nearest InSinkErator Authorized Service Agency or to reach Technical Support. -
Page 11: Model No. Cc-202D-8 (380/460V, 3 Phase, 1/2 - 10 Hp)
• Black wires = Line voltage (380 - 460 V) control. CC-202D-8 380/460 V 3-phase 1/2 to 10 HP Call Toll Free 1-800-845-8345 for the nearest InSinkErator Authorized Service Agency or to reach Technical Support.
Need help?
Do you have a question about the CONTROL CENTER CC-202D and is the answer not in the manual?
Questions and answers