Advertisement
Cleaning the filter
1. Turn off the humidifier and unplug the power cord.
2. Remove the top cover and untwist the filter cover.(graph 1)
3. Take out the filter.(graph 2)
4. Soak the filter in the water for about 1 hour.(graph 3)
5. Wash the filter gently. Do not rub the filter.(graph 4)
6. Install the filter back.(graph 5)
7. Install the cover and your humidifier is ready to go. (graph 6)
graph 1
graph 4
Attention
For your more comfortable experience, it is recommended to clean the
filter every week and change the filter every 3 months.
For more detailed operation,please check our support page.
Warranty
Company warrants the original purchaser only, this product to be free
from defects in workmanship and materials under normal use and
service (all except human matters) for 1 year from the date of receiving.
graph 2
graph 3
graph 6
graph 5
AirH001
Airdog USA Inc.
Customer Service: support@AirdogUSA.com
Official Website: http://airdogusa.com/
Advertisement
Table of Contents
Summary of Contents for Airdog AirH001
- Page 1 4 graph 6 graph 5 Attention Airdog USA Inc. For your more comfortable experience, it is recommended to clean the filter every week and change the filter every 3 months. For more detailed operation,please check our support page. Customer Service: support@AirdogUSA.com Official Website: http://airdogusa.com/...
- Page 2 Installation Open the box and packages,the Airdog mistfree Operation with front panel evaporative humidifier is ready to use by simply adding water. Add Water Display panel 1.Remove the cover. Add water as shown in the below picture. Current humidity level in % 2.Add water into the tank directly from the outlet, no need to remove the cover.
Need help?
Do you have a question about the AirH001 and is the answer not in the manual?
Questions and answers