Polaris Sportsman 850 2021 Owner's Manual page 54

FEATURES AND CONTROLS
DIAGNOSTIC CODE
Diagnostic Code Screen will show available MIL that has come on during that
ignition cycle.
To access the Diagnostic Code
Screen, do the following:
1. Press and hold the MODE
button to enter the Options
Menu. "OPTIONS" will
display on the screen for 3
seconds before showing
first menu item.
2. Select "Diagnostic Codes" from the Options Menu by pressing the MODE
button.
Toggle the Up/Down Buttons to cycle through Code(s).
This option will only be available if a fault code was set or is active during the
current ignition key 'on' cycle. Turning off the ignition will clear any save fault
q
Display area 1 will show FMI
w
Display area 2 will show SPN
e
Clock Area will show Count.
52
NOTICE
codes from the gauge.