The illustrations used in the manual are to illustrate the operation method and structure of the product. Where there is a small difference between the physical item and the illustrations, please take the physical as the standard. Read these instructions carefully before attempting to assemble, install, operate or maintain the product.
Page 3
4. Always operate the appliance on a horizontal surface which is level and stable. Do not operate the appliance on or near combustible materials such as tablecloths or curtains. 5. Do not place the appliance on or near a hot gas or electric burner, or in a heated oven. 6.
17. This misting fan should be operated on a separate electrical power point from other operating appliances. If the power point is overloaded with other appliances, this misting fan may not work properly. 18. Leave enough open space from other objects while in use. Do not block air intakes or exhausts.
BASE ASSEMBLY: 1. Put the plastic cover on the weighted base. 2. Remove the screws from the ends. Insert the two supporting tube ends into the plate holes. 3. Fit the washers and replace the two screws to fix the supporting tubes. FAN HEAD/CONTROLLER ASSEMBLY: 1.
4. Push the other end of the hose into the mist vent, that is located at the front of the fan grid. Do not kink the hose. FILLING THE WATER TANK Unplug the appliance before filling and cleaning the water tank. 1.
CONTROLS: CONTROL PANEL: Indicator lights: 1. Mode: Normal/Natural/Sleeping 2. Timer indicator 3. Speed: high-medium-low 4. Power on indicator 5. Oscillation 6. Mist indicator REMOTE CONTROL To use the remote control, first, insert two AAA batteries (not included) in the remote control. Buttons: A.
OPERATION: When connected to power, the indicator will illuminate. The fan is in standby mode. You can control the fan with the control buttons or the remote control. Operation using the buttons on the fan: 1. Fan function: •Use the “ON/SPEED” button to switch the fan ON •Set the wind speeds (high-medium-low) by pressing the “ON/SPEED”...
Page 10
When the indicator light for 1 hour is illuminated, the misting fan will operate for 1 hour. When the indicator lights for 0.5 hours and 1 hour are both illuminated, the misting fan will operate for 1 hour and 30 minutes. When the indicator light for 2 hours is illuminated, the misting fan will operate for 2 hours.
Page 11
6. Different wind settings The wind mode can be adjusted by pressing the “MODE” button on the control panel or the remote. •Press “Mode” to set the wind mode (normal, sleep, natural). 7. Switching off •The fan is switched off by pressing the “OFF” button. CLEANING, MAINTENACE, SERVICE, AND DISPOSAL Cleaning •Always unplug the fan before cleaning it.
FAULTS & TROUBLESHOOTING Fault Possible cause Solution The Off button does not light The fan is not plugged in. Plug the fan in. Reset the fuse. up, the fan does not start, The fuse has tripped. there is no mist There is no mist No water in the tank.
Need help?
Do you have a question about the MF550 and is the answer not in the manual?
Questions and answers