Advertisement
575 Birch Street, Forestville, CT 06010
Phone (860) 584-9158 Fax (860) 584-2136
www.locknetics.com
Pro 443 Series
Cabinet Lock
BATTERY POWERED
MOTOR DRIVEN
LOCK OR HARD
WIRED DEVICE
Description of Operation
The Pro Controller provides a simple solution to access control needs. Providing 20 user
code capability through manual programming, this is a new and simple product to install and
program. The Pro is available in hard wired or battery powered versions. The battery pow-
ered device may be used with any Locknetics motor driven locking device, such as the
9100BP or the 443 Cabinet Lock. The hard wired unit will work with any 12 or 24 VDC lock-
ing device, such as a magnetic lock or electric strike, not requiring any more current than 5
amps. Access control is now as easy as 1) install locking device, 2) install keypad, 3) plug
and play!
FORM 77027 Rev. B
BATTERY POWERED LOCK WITH ACCESS CONTROL
STANDARD
TO REMOTE
RELEASE INPUT
DEVICE
Pro Access System
INSTALLATION AND WIRING INSTRUCTIONS
Pro 9100 Series
Power Strike
BATTERY PACK OR
HARD WIRED
BOARD
- PAGE 1 -
9" LOCK FRONT
FOR WOOD FRAMES
PRO CONTROLLER
KEYPAD
5/99
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Locknetics Pro 9100 Series
Summary of Contents for Locknetics Pro 9100 Series
- Page 1 The Pro is available in hard wired or battery powered versions. The battery pow- ered device may be used with any Locknetics motor driven locking device, such as the 9100BP or the 443 Cabinet Lock. The hard wired unit will work with any 12 or 24 VDC lock- ing device, such as a magnetic lock or electric strike, not requiring any more current than 5 amps.
- Page 2 Pro Access System BATTERY POWERED LOCK WITH ACCESS CONTROL INSTALLATION INSTRUCTIONS 1. INSTALL MOTOR DRIVEN LOCKING DEVICE Follow the template and installation instructions provided with the locking device. 2. INSTALL SINGLE GANG BOX Install single gang box in wall. Run wiring from locking device to gang box. Secure battery pack inside the gang box.
-
Page 3: Installation Instructions
Pro Access System BATTERY POWERED LOCK WITH ACCESS CONTROL INSTALLATION INSTRUCTIONS To battery powered locking device BLACK (-) WHITE (+) BATTERY OPERATED 1. Plug keypad into battery pack 4 pin con- nector. 2. Plug battery pow- Plug in connec- ered locking device into tors Battery pack battery pack 2 pin con-... -
Page 4: Erase Memory
Pro Access System BATTERY POWERED LOCK WITH ACCESS CONTROL INSTALLATION AND WIRING INSTRUCTIONS DEFINITION OF CODE FUNCTIONS AND FACTORY DEFAULTS FACTORY DEFAULT MASTER 97531 Allows access to programming functions. Will not release lock. NORMAL 13579 Unlocks lock for relock time delay. ACCESS TOGGLE 135135... -
Page 5: Error Code Chart
Pro Access System BATTERY POWERED LOCK WITH ACCESS CONTROL INSTALLATION AND WIRING INSTRUCTIONS RELOCK DELAY 1. Enter master code. 2. Enter 9 9 *. 3. Press * key for the desired relock time. The red LED will blink once for each second Battery Operating Information Low Battery Indication: When a valid code or is entered the green LED will flash during the unlock...
Need help?
Do you have a question about the Pro 9100 Series and is the answer not in the manual?
Questions and answers