These devices will be referred to as the Modem in this document. The InCoax D2501 is a one-channel Ethernet over Coax Access Node, capable of 2.5 Gbps on the RF port supporting up to 8, 16 or 31 Modems depending on model. The communication with the Modems is based on the MoCA Access™...
High voltages which can cause severe electric shocks are present inside the DPU enclosure. For any inspection, adjustment, and repair work please contact the local InCoax dealer. The warranty may be void if the cover to the high voltage DPU area has been opened.
Once the DPU has been installed in, or near, the building the only required operation to connect new customers is to provide them with a Modem. (Please refer to the InCoax handbook System Design Guidelines for Cable Technicians for guidance.) As soon as the Modem has been connected to the coaxial network, it will automatically be detected and configured by the DPU through the Management System (if such setup has been enabled in the Management System).
In general, the D2501 can be used for different coaxial network use cases depending on the used spectrum for the current TV/DOCSIS services. MoCA Access have five default frequency bands and InCoax has added two additional frequency bands as presented hereunder: •...
DPU Web Interface Access The DPU can be managed via the management port using a web interface. Please refer to the InCoax document “Configuration Manual” for a more detailed description of the web interface and how to set up the DPU. See reference {f}.
InCoax D2501 Software User Manual - A detailed description of the web interface and the setup of the DPU. IEEE 802.1p refers to a specification for giving Layer 2 switches the ability to prioritize traffic as well as perform dynamic multicast filtering.