Advertisement
U s e r M a n u a l
CAM-50
PRODUCT SPECIFICATIONS
Image Sensor:
Resolution (Pixels):
Viewing Angle:
Prior to Installation
Read the manual prior to installation. Technical knowledge is necessary for installation. Please ensure you
use the correct tools to avoid damage to the vehicle or product.
Connects2 can not be held responsible for the installation of this product.
Technical Support
Connects2 want to provide a fast and suitable resolution should you encounter any technical issues. With this
in mind, when contacting Connects2, try to provide as much Information as possible. This will speed up the
process and help us to help you.
Please use our dedicated online technical support centre: support.connects2.com
Rear DVR to work with CAM-KIT13 & 14
CMOS
1920*1080
146° (Horizontal)
119° (Vertical)
HD DVR Camera
Night Vision
Product Dimensions:
58.65(L)x30(W)x23.7(H) mm
Operating Temp.:
-20°C to +70°C
Advertisement
Table of Contents
Summary of Contents for 2connect Vision CAM-50
- Page 1 U s e r M a n u a l CAM-50 HD DVR Camera Rear DVR to work with CAM-KIT13 & 14 PRODUCT SPECIFICATIONS Image Sensor: CMOS Night Vision Resolution (Pixels): 1920*1080 Product Dimensions: Viewing Angle: 146° (Horizontal) 58.65(L)x30(W)x23.7(H) mm 119°...
- Page 2 Connects2Vision CONTENTS - DVR Camera - Power Cable Note: works with CAM-KIT13 & 14 only INSTALLATION 1. Connect the Black cable to CAM-KIT13 / 14 and run to the rear of the vehicle 2. Connect to CAM-50. 3. Select a suitable location in the rear window of the vehicle. 4.
Need help?
Do you have a question about the Vision CAM-50 and is the answer not in the manual?
Questions and answers