1. Manuals
  2. Brands
  3. FNX Solar Manuals
  4. Solar panel
  5. Solarix 60
  6. Quick start manual

FNX Solar Solarix 60 Quick Start Manual

Hide thumbs
1
2

Advertisement

Table of Contents

1. Unfold the solar panel completely and make sure that all the cells are facing directly to the sun.
2. Using the included DC cable connector, plug one end to the DC socket on the solar panel control box shown
below.
3. Plug the other end to the power input socket of the power station. Below shows the FLEX-GEN 200 unit for
reference purposes.
4. With enough sunlight, the power station will indicate charging by blinking the charge percentage value on the
display.
5. The charging is finished once the display indicates 100%. Unplug the solar panel from the unit. Fold the solar
panel for storage.
Quickstart Guide
Solarix 60

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Solarix 60 and is the answer not in the manual?

Questions and answers

Summary of Contents for FNX Solar Solarix 60

  • Page 1 Quickstart Guide Solarix 60 1. Unfold the solar panel completely and make sure that all the cells are facing directly to the sun. 2. Using the included DC cable connector, plug one end to the DC socket on the solar panel control box shown below.
  • Page 2 Care and Maintenance Instructions: • Always fold the solar panel when not in use. This protects the solar cells from external elements. • Do not step on the solar panel. It could crack the cells that could lead to reduced solar conversion efficiency or premature failure.

Table of Contents