Advertisement
ASSEMBLY:
Here are the easy-to-follow instructions for assembling your
SPiDER-MAN & FRiENDS SiT 'N SPiN toy. Please follow assembly
instructions in proper order for best results.
2.
Use a Phillips/cross head
screwdriver (not included)
and 2 screws (included) to
connect the turn handle
to the top of the center
post. The screws connect
on the sides of the turn
handle as shown.
3.
Place the center
post/turn handle into
the SIT 'N SPIN base as
shown. Flip the SIT 'N
SPIN base over and
use a Phillips/cross
head screwdriver
and 1 screw
(included)
to connect
the center
post/turn
handle to
the base.
1.
Connect the right side and left side
of the center post by snapping the
two pieces together. This is a
one-time assembly.
2a.
2b.
Note:
Check to be sure that
all assembled parts
are securely attached
before using the toy.
Note:
For best performance,
child should be seated
on one of the two
designated seating
areas marked with the
red star.
seating areas
NOW YOU'RE READY TO PLAY!
PLAY FEATURES:
Your child can keep the fun spinning as he hears music
and fun phrases! Here are some play suggestions to get
you started:
NOTE: This toy is packaged in "Demo" mode. To enable full play features, change to "Play"
mode located on the underside of the toy. This toy also features a sounds-off mode for
PLAY
OFF DEMO
quiet play! Simply move the switch at the bottom of the toy to "Off."
1.
2.
1.
Push the moon-shaped button on the top of the SIT 'N SPIN base or spin the base
to start the theme song and hear fun phrases. You may press the moon-shaped
button on the top of the SIT 'N SPIN base to switch to giggles and web-slinging sound
effects, or you may continue spinning and the toy will automatically switch.
Music and Fun Phrases
Spider-Man® will encourage a "spin"-along!
Giggles and Sound Effects
Spider-Man® will giggle as your child hears web-slinging sound effects while spinning!
2.
After several seconds of inactivity, the toy will automatically shut off. To play again,
simply spin the base or press the moon-shaped button. When storing, make sure the
three-position switch on the bottom of the toy is moved to "Off" position to
conserve battery life.
Press Here
Advertisement
