heddier electronic Human Detector Flex Instruction Manual
  1. Manuals
  2. Brands
  3. heddier electronic Manuals
  4. Security System
  5. Human Detector Flex
  6. Instruction manual

heddier electronic Human Detector Flex Instruction Manual

Hide thumbs Also See for Human Detector Flex:
Table of Contents

Advertisement

Quick Links

Download this manual
Instruction Manual
Instruction Manual
H
Flex
uman Detector
is a product of the
heddier electronic GmbH
Raiffeisenstraße 24
48734 Reken
Germany
Tel. +49 (0) 2864 95 178-0
info@human-detector.com
Release I/2022
Specifications are subject to change without prior notice. All measurements have been made under specific conditions. Disclaimer: This
document, as well as all other documents (offers / specifications / cover letters / etc.), do not guarantee any functionality of our products
desired by the customer. heddier electronic GmbH does not guarantee any functionality or marketability desired by the customer. The
customer should be able to make his own decision on the basis of the transmitted documents. heddier electronic GmbH supports him in this,
as it is given by the "General Terms and Conditions of heddier electronic GmbH". In no case heddier electronic GmbH is liable for damages
and consequential damages caused by the use of the products and descriptive documents. Excluded from this are damages caused by
negligent behavior or damages that are regulated by superior laws.
Copyright by heddier electronic GmbH. Human Detector is a registered trademark of heddier electronic GmbH.
Flex
Security made easy - Human Detector
1 / 49

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Human Detector Flex and is the answer not in the manual?

Questions and answers

Related Manuals for heddier electronic Human Detector Flex

Summary of Contents for heddier electronic Human Detector Flex

  • Page 1 GmbH supports him in this, as it is given by the "General Terms and Conditions of heddier electronic GmbH". In no case heddier electronic GmbH is liable for damages and consequential damages caused by the use of the products and descriptive documents.

  • Page 2: Table Of Contents

    Instruction Manual Table of contents HDF-CONFIGURATOR Introduction ......................3 Human Detector Flex Software ..................5 HDF-CONFIGURATOR Software ................5 General ......................5 Safety instructions ....................7 General terms of use ..................8 Installation ...................... 11 Starting HDF-CONFIGURATOR ................13 HDF-CONFIGURATOR menus ................14 Settings ......................

  • Page 3: Introduction

    Sensors and alarm modules are available for almost every task. These are extremely small and can be operated with inexpensive lithium batteries, which last for up to 10 years. (HDF - Human Detector Flex) HDF-3D PROTECT The HDF-3D PROTECT module detects the slightest vibrations (structure-borne sound) and movements.
  • Page 4 Instruction Manual The HDF-BUZZER and HDF-SPEECH alarm centres Two systems with different extension levels are available with the HDF-BUZZER and HDF-SPEECH alarm centres. The basic system HDF-BUZZER enables the output of a loud alarm via a built-in piezo siren (buzzer). In addition, three potential-free relay outputs are available.

  • Page 5: Human Detector Flex Software

    The screen of the HDF-CONFIGURATOR software is used to control your security installation. The manufacturer, heddier electronic GmbH, has placed great emphasis on ensuring that all relevant information is always in the user's field of vision. The operating steps involve only a few repetitive actions.
  • Page 6 Instruction Manual Main menu The main menu with a red background contains the most frequently used functions for controlling the software. Additional menu The additional menu with a green background allows direct access to frequently used functions. The additional menu can display different contents depending on the operating modes. Configuration area The overall configuration of the project is displayed in the configuration area with a yellow background.

  • Page 7: Safety Instructions

    Instruction Manual The HDF-CONFIGURATOR software in EASY-Mode is only required for changing the alarm behaviour of the respective HDF-BUZZER or HDF-SPEECH unit. This change is then valid for all paired alarm sensors. MULTI-Mode The use of the HDF-CONFIGURATOR software is mandatory in MULTI-Mode. The complete installation of the security system is initially planned with the software.

  • Page 8: General Terms Of Use

    Flex General Terms of Use for the Configuration Software Human Detector - Configurator (HDF- CONFIGURATOR) of heddier electronic GmbH Last updated: 01 January 2022 1 Scope 1.1 These General Terms of Use regulate the use of the configuration software HDF-CONFIGURATOR (hereinafter referred to as "software") between the user (hereinafter referred to as "client") and heddier...
  • Page 9 Instruction Manual b) in the event of gross negligence, in the amount of the typical and foreseeable damage that should have been prevented through duty of care; c) in other cases, only in the event of a breach of a material contractual obligation and in the event of default, Flex to compensation for typical and foreseeable damage, limited to the costs of the Human Detector hardware directly affected by the installation.
  • Page 10 Instruction Manual 8 Applicable law and place of jurisdiction 8.1 The law of the Federal Republic of Germany shall apply to the exclusion of the UN Convention on Contracts for the International Sale of Goods. 8.2 If the client is a merchant, a legal entity under public law or a trust under public law, the place of jurisdiction shall be Coesfeld.

  • Page 11: Installation

    CONFIGURATOR-en.msi. These can be obtained from heddier electronic GmbH on request. Important note: Please check installation files carefully you may find in forums or on internet platforms. heddier electronic GmbH cannot assume any responsibility and will not provide support for programmes from non-official sources.
  • Page 12 Instruction Manual After entering all the required information, you can start installing the programme files by pressing [Install]. After all files have been set up, you can finish the installation by pressing [Finish]. The HDF- CONFIGURATOR software can now be started from the Windows start menu. Repair and removal of the HDF-CONFIGURATOR software Start the HDF-CONFIGURATOR-en.msi file again.

  • Page 13: Starting Hdf-Configurator

    Instruction Manual Starting HDF-CONFIGURATOR After starting the HDF-CONFIGURATOR software, the following screen appears: You can choose one of the following three options in the action window: New Project Flex Creates a new Human Detector project. Open Project Flex Opens an existing Human Detector project.

  • Page 14: Hdf-Configurator Menus

    Instruction Manual HDF-CONFIGURATOR menus The HDF-CONFIGURATOR software offers four function blocks in the main menu. These are grouped together in the usual way in a menu bar at the top of the screen. File menu The File menu contains the following functions. New Project Flex Creates a new Human Detector...
  • Page 15 Instruction Manual Close Exits the HDF-CONFIGURATOR software. If the project has not been saved, a confirmation prompt will be displayed. Edit menu The Edit menu contains the following functions. Add HDF-Sensor Flex Enables the addition of new Human Detector sensors. Add HDF-BUZZER Enables the addition of a new HDF-BUZZER alarm centre.
  • Page 16 Instruction Manual Designer menu The Designer menu is deactivated in the current HDF-CONFIGURATOR software. HDF-DESIGNER is a future software module to support the graphical design work of building services planners and architects. Help menu The Help menu contains the following functions. Version Displays the current version number of the HDF-CONFIGURATOR software.

  • Page 17: Settings

    Instruction Manual Settings In the Settings menu the language of the HDF-CONFIGURATOR software can be set. Additional languages can be added to the software. Please contact our technical sales department for more information about language extension. Changing the set language will become effective after restarting the software. Manage HDF projects Flex All important settings for securing exhibits with the Human Detector...
  • Page 18 Instruction Manual You can choose from the following: EASY-Mode EASY-Mode is the most simple operating mode. It is intended for small security system installations. In EASY-Mode up to 30 alarm sensors can in principle be connected to one or more alarm centres (HDF- BUZZER or HDF-SPEECH).
  • Page 19 Instruction Manual The following entries are possible: Project Mode Three operating modes (EASY, MULTI and PROFI-Mode) are available. The display of the function area and the selection of menu items in the additional menu change depending on the selected mode. Institution Input field for the name of the institution (e.g.

  • Page 20: Open Hdf Project

    Instruction Manual Open HDF project Use the function from the action window when starting the programme or from the [File] menu, if you want to open an existing [HDF project]. In both cases a selection window will be displayed. Select the desired project file (file extension *.hdfproj) and confirm your selection by pressing [Open]. Save HDF project The project is automatically saved by selecting this menu item.

  • Page 21: Change Hdf Project Password

    Instruction Manual Change HDF project password The HDF project password can be changed at any time. The current password needs to be entered first. Then the new matching password needs to be entered twice. The entries are confirmed by pressing [Change Password].

  • Page 22: Add And Manage Hdf Sensors

    Instruction Manual passwords. Only enter the passwords manually if you absolutely wish to do so. Please note that the passwords of the HDF alarm units are not stored in the HDF-CONFIGURATOR software. Store the passwords in a different location for a higher level of security. If you forget the passwords, there is no possibility to bypass a missing password.

  • Page 23: Add Hdf Sensors With One Alarm Channel

    Instruction Manual As long as the mouse is placed on a sensor field in the column with the HDF sensors, you can press the right mouse button. The following action window is displayed. You can edit the settings of the sensor module, duplicate the HDF sensor or delete the complete HDF sensor. The [Duplicate] function enables you to quickly create similar sensors without having to re-enter details each time.
  • Page 24 Instruction Manual The following entries are necessary to add an HDF sensor with one channel: Sensor Type Press the input field to select the sensor type. A window is displayed in which you can determine the desired sensor type. Name Create and enter a short and meaningful name.

  • Page 25: Add Hdf Sensors With 2 Alarm Channels

    Instruction Manual Assigned HDF-AMD in Range Click on the input field. If you have created one or more HDF-AMD, they will appear in the selection field. Select the HDF-AMD that is placed within safe range (good reception) of the sensor module. Only one HDF- AMD can be assigned per sensor module.

  • Page 26: Add And Manage Hdf Alarm Centres

    Instruction Manual Add and manage HDF alarm centres Adding HDF alarm control units follows the same procedure as adding HDF sensors. All created alarm centres are displayed in the horizontal bar of the configuration field. The function for adding HDF alarm centres: can be used in two ways: ·...
  • Page 27 Instruction Manual If you have added an HDF alarm centre by mistake or an already existing component needs to be deleted, press the red recycle bin symbol or the right mouse button and select [Delete]. Before the deletion process takes place, you need to confirm a security query with "Yes". This prevents the accidental deletion of items. Adding HDF-BUZZER and HDF-SPEECH is described in the following two chapters.
  • Page 28 Instruction Manual Enter the hardware ID in the field highlighted in red. It doesn't matter whether you write the letters in upper or lower case. The HDF-CONFIGURATOR software converts all entries into capital letters. Important notes: Entering the hardware ID is mandatory if you want to transfer the data of your project to the alarm centres (HDF-BUZZER or HDF-SPEECH) or to the alarm management system (HDF-AMD).
  • Page 29 Instruction Manual Alarm Duration The alarm duration indicates the total length of the alarm sound. It is independent of the selected alarm sound. Note: Independent of the input (e.g.: 3.567 seconds), the actual value is calculated to one decimal place (here e.g.: 3.5 seconds).
  • Page 30 Instruction Manual Note: Independent of the input (e.g.: 3.567 seconds), the actual value is calculated to one decimal place (here e.g.: 3.5 seconds). Toggle Relay You can use this slide switch to set the relay on and off for a toggling behaviour. If the relay is toggled, you can set the switching interval in the next input field.

  • Page 31: Add Hdf-Speech

    Instruction Manual Add HDF-SPEECH Adding the HDF-SPEECH is identical to adding the HDF-BUZZER. With the only exception that voice alarm is supported. The HDF-SPEECH alarm centre has an additional mp3 voice output card. Up to three different voice or sound messages can be stored in mp3 format. Different voice or sound messages can therefore be assigned to different HDF sensors.

  • Page 32: Sensor Configuration

    Instruction Manual Important note: If you want to issue long voice alarms without interruption with the HDF-SPEECH, it is recommended that you also switch on the buzzer alarm with a short siren tone. If another alarm is triggered during the long voice output, it is indicated by the short siren tone.
  • Page 33 Instruction Manual With the exception of the mp3 file for the voice alarm on the HDF-SPEECH, however, basic settings (such as alarm times or switching times) cannot be changed. This can be used to output different voice messages for different sensors. It is also possible, for example, to connect external sensors with a pre-alarm detector (e.g. laser scanner with several curtains) to an HDF-EXTERN alarm module.

  • Page 34: Programming Hdf-Buzzer/Speech

    Instruction Manual Important notes: HDF-ANTIJAM should only be used in conjunction with HDF-AMD. HDF-ANTIJAM generates coded signals at regular intervals that are used to monitor the radio room. Monitoring is automatically activated as soon as HDF-ANITIJAM is linked with HDF-AMD. HDF-ANTIJAM must not be linked to an HDF alarm centre (HDF-BUZZER or HDF-SPEECH).

  • Page 35: Change Hdf-Buzzer/Speech Password

    Instruction Manual Notes: Programming is not possible without the correct password. HDF-Admin The default password is: · Press the [Programming button] in the HDF-CONFIGURATOR software. · The software indicates the successful programming of the HDF alarm unit. · You can now switch off the alarm centre, remove the mini-USB cable, close the casing of the unit and mount the unit in its original position.
  • Page 36 Instruction Manual Follow these steps to change the passwords of the HDF alarm centres: · Open the housing cover of the alarm centre. · Connect the mini-USB socket for changing the password to your personal computer. The required cable is included in the scope of delivery of the HDF alarm centre.

  • Page 37: Read Hdf-Buzzer/Speech Configuration

    Instruction Manual Read HDF-BUZZER/SPEECH configuration The basic steps for reading out the configuration of an HDF alarm centre are identical to programming the unit. Follow these steps for reading out the configuration of an HDF alarm centre: · Open the housing cover of the alarm centre. ·...

  • Page 38: Setting Up Hdf Alarm Management

    Instruction Manual Setting up HDF alarm management Flex The Human Detector Technology enables the user to utilize a cost-effective and very efficient alarm management system. All alarm messages are monitored here by one or more central alarm management devices (HDF-AMD). The alarm messages are forwarded to various smartphones and other end devices. The so-called PROFI-Mode provides the option to forward alarm messages silently to the respective security personnel.
  • Page 39 Instruction Manual The following entries can be made: Name Create and enter a short and meaningful name. The word "AMD" will be replaced in the alarm device list by your specified name. A meaningful name could be, for example, "HDF-AMD Main Building". Hardware ID The hardware ID consists of the letters AMD- followed by a 6-digit hexadecimal number.

  • Page 40: Creating Alarm Areas

    Instruction Manual Creating alarm areas An essential part of an alarm management system is the forwarding of alarm messages to the responsible security personnel. The HDF-CONFIGURATOR software enables you to completely map your property with several buildings, exhibition halls, rooms and room areas, if applicable. This enables the detailed allocation of alarm areas.

  • Page 41: Assign Alarm Areas To Hdf Sensors

    Instruction Manual Assign alarm areas to HDF sensors After adding the HDF-AMD and setting up the alarm areas, the individual sensors need to be linked to the alarm areas and the HDF-AMD. The required action window is displayed when you click on the desired sensor in the sensor list. You can apply the following settings: Reports to HDF-SUPERVISOR App The forwarding of alarm messages to the HDF-SUPERVISOR app can be enabled via a slide switch.

  • Page 42: Programming Hdf-Amd

    Instruction Manual Programming HDF-AMD After having applied all settings and links, they can be transferred to the HDF-AMD. Press the [Programming HDF-AMD] in the [Edit] menu or select the [Program] in the additional menu and then [Programming HDF-AMD]. To program the HDF-AMD, proceed as follows: ·...
  • Page 43 · Enter the Server User Name and the Server Password. You will receive this information when purchasing the HDF-AMD from heddier electronic GmbH. · Press the “Sign In” Button. If you entered the correct credentials a page will be displayed telling you that the browser can be closed.
  • Page 44 Instruction Manual · Press [Programming HDF-AMD] button in the HDF-CONFIGURATOR software. · The software indicates the successful programming of the HDF-AMD. · Wait until the green operating LED illuminates and the yellow control LED is extinguished. · Switch off the HDF-AMD, close the device housing and install the device in its original position. If you changed the configuration in your project (e.g.

  • Page 45: Change Hdf-Amd Password

    Instruction Manual Change HDF-AMD password Passwords should be changed at regular intervals or after irregular events (e.g. the departure of an employee with knowledge of passwords). To change the password of the HDF-AMD, proceed as follows: · Switch on the HDF-AMD and wait a moment until the green operation LED illuminates. ·...

  • Page 46: Read Hdf-Amd Configuration

    Instruction Manual Read HDF-AMD configuration The basic steps for reading out the configuration of an HDF-AMD are identical to programming the unit. Follow these steps for reading out the configuration of a HDF-AMD: · Open the housing cover of the HDF-AMD. ·...

  • Page 47: Download Hdf-Amd Log Files

    Instruction Manual Download HDF-AMD log files The basic steps for reading out the log files of an HDF-AMD are identical to programming the unit. The log files can provide interesting conclusions about the operation of the security device. Note: Older log files are regularly deleted, since the storage space for log files on an HDF-AMD is limited. It is recommended to read out and archive the log files at regular intervals.

  • Page 48: Update Hdf-Amd Firmware

    · Press [Update Firmware] in the HDF-CONFIGURATOR software. · The HDF-AMD automatically connects to the update server of heddier electronic GmbH and performs the update automatically. Important note: All devices need to be updated at the same time, if several HDF-AMD are in use. The operation with different firmware versions is not recommended.

  • Page 49: Miscellaneous

    Changes to technical specifications and errors are possible. The manufacturer reserves the right to change the technical specifications of individual devices and components at any time and without providing reasons. The copyright of this document is owned by heddier electronic GmbH. The production of copies for work Flex support or maintenance of the Human Detector security systems is permitted at any time.

Table of Contents