Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Harman Kardon Signature Series
Summary of Contents for Harman Kardon Signature Series
- Page 1 2.1 Multichannel Amplifier Owner’s Manual...
-
Page 2: Table Of Contents
Signature 2.1 Multichannel Amplifier Introduction ......... 1 Safety Information . -
Page 3: Introduction
Congratulations! As the owner of a Harman Kardon Signature Series 2.1 Power Amplifier, you have at your command a unique product. The 2.1 has been carefully designed to deliver the best possible sonic performance, along with outstanding industrial design that matches other Harman Kardon Signature Series products and complements any interior design. -
Page 4: Important Safety Information
Important Safety Information Verify Line Voltage Before Use Your new Signature Series 2.1 amplifier has been factory- configured for use with 120-volt AC line current. Connecting the amplifier to a line voltage other than that for which it is intended can create a safety and fire hazard, and may damage the amplifier. -
Page 5: Unpacking And Installation
Cleaning When the unit gets dirty, wipe it with a clean, soft and dry cloth. If necessary, first wipe the surface with a soft cloth slightly dampened with mild soapy water, followed by a fresh cloth with clean water. Wipe immediately with a dry cloth. -
Page 6: Front And Rear Panels
Front Panel Controls On/Off 1 Power Switch: Press this switch to turn the 2.1 on for manual operation, or to place it in the Standby mode for automatic/remote turn-on when the 2.1 is connected to a device with a compatible trigger circuit. 2 Power On Indicator: When the word illuminated in blue, the 2.1 is in a normal operating condition. -
Page 7: Installation And Connections
To activate this system, this amplifier must be used in conjunction with a Signature Series 2.0, other compatible Harman Kardon products or other approved devices. - Page 8 Cable with a gauge of 16 may be used for short runs of less than ten feet. We do not recommend the use of cables with an AWG equivalent of 18 or higher due to the power loss and degradation in performance that will occur.
-
Page 9: Operation
Manual Operation. When the 2.1 is connected to another Signature Series product or to another compatible device, follow the instructions for Automatic Operation. Operation of the Signature Series 2.1 is simple. There are no controls to adjust once the installation is complete. Manual Operation... -
Page 10: Service Information
If your installation has followed the procedures in this manual, you should enjoy many years of trouble-free operation and high-quality listening enjoyment. The 2.1 does not contain any user-serviceable parts. If you suspect a problem that may require service assistance, contact your dealer, installer or an authorized Harman Kardon service depot. -
Page 11: Technical Specifications
Signature 2.1 Multichannel Amplifier Specifications Power Output: High-Current Capability: Frequency Response: Power Bandwidth: THD/IMD: Crosstalk Negative Feedback: Input Impedance: Input Sensitivity: Remote Trigger Voltage: Remote Trigger Impedance: Dimensions (H x W x D): Weight: Power Requirements: 5 x 100 watts @ 8 ohms 20Hz –... - Page 12 Printed in the United States Part #1111-HKSIG21 HA160-0003-A...