Page 3
Operation Speed Adjustment Dial/Working with Paint & Mortar Mix Carbon Brush Replacement Cleaning & Maintenance Warranty/Decleration of Conformity...
Page 4
WARNING Please read and understand these Safety Warnings, Safety Symbols and Instructions carefully and retain for future use INTENDED USE WORK AREA SAFETY The machine has been designed to mix Keep work area clean and well lit. liquid and powdery building materials Cluttered or dark areas invite accidents.
Page 5
WARNING Please read and understand these Safety Warnings, Safety Symbols and Instructions carefully and retain for future use electric shock. ensure these are connected and properly used. Use of dust PERSONAL SAFETY collection can Stay alert, watch what you are doing and reduce dust-related hazards.
Page 6
WARNING Please read and understand these Safety Warnings, Safety Symbols and Instructions carefully and retain for future use Use the power tool, accessories and tool Only use the extension cable approved bits etc. in accordance with these for use in the working area. instructions, taking into account the The unit must only be started and working conditions and the work to be...
Page 7
SPECIFICATION RATED NO LOAD RATED POWER SPEED FREQUENCY VOLTAGE 1600 0-680/ 0-990 1. Mixing Stem 6. Safety Switch (see page 6) 2. Mixing Paddle 7. Gear Selection Dial (see page 7) 3. Thread Attachment 8. Mixing Stem Spanner 4. Motor 9.
Page 8
MIXER ASSEMBLY Before performing any assembly, cleaning or maintenance tasks, always ensure the powertool is switched off and is disconnected from the mains supply First screw the MIXING STEM (1) and MIXING PADDLE (2) together. Screw the assembled MIXING STEM (1) and MIXING Turn only the MIXING PADDLE SPANNER (9) to PADDLE (2) into the THREAD ATTACHMENT (3).
Page 9
OPERATION WARNING Always ensure the MIXING STEM (1) & MIXING PADDLE (2) are completely secure as outlined in the Mixer Assembly Section of this manual To switch on the mixer, depress the SAFETY SWITCH Release the ON/OFF TRIGGER (5) to cease (6) and then pull the ON/OFF TRIGGER (5).
Page 10
GEAR SELECTOR WARNING The GEAR SELECTION DIAL (7) should only be changed when the unit is stopped, in order to prevent the gearing from being damaged. The switch position enables you to work at higher or lower speeds of rotation. Rotate to the desired speed setting.
Page 11
CARBON BRUSH REPLACEMENT Before performing any assembly, cleaning or maintenance tasks, always ensure the powertool is switched off and is disconnected from the mains supply Screw the CARBON BRUSH CAP (10) in a clockwise If excessive sparking occurs you may have to replace the carbon brushes.
Page 12
CLEANING & MAINTENANCE Before performing any assembly, cleaning or maintenance tasks, always ensure the powertool is switched off and is disconnected from the mains supply Remove the plug from the mains socket before carrying out any adjustment, servicing or maintenance. ATTENTION It is recommended that you always clean the unit immediately Always store the power tool in a dry place.
Page 13
5th Floor The Tower Deva City Office Park Manchester M3 7BF Declare under our sole responsibility that the product: SKU: 3500024 Description: VonHaus 1600W Paddle Mixer To which this declaration relates is in conformity with the following directives: 2014/30/EU, 2014/42/EC, 2011/65/EU.
Page 14
Thank you for purchasing the Paddle Mixer. VonHaus is a registered trademark of DOMU Brands Ltd Made in China for DOMU Brands Ltd M24 2RW.
Need help?
Do you have a question about the 3500024 and is the answer not in the manual?
Questions and answers